横河电机DY040-DALAA2-0D涡街流量计

【产品详情】

横河电机DY000-DALAA040-2D涡街流量计

高级自诊断 提供有关高振动环境、流量波动过大以及脱落杆周围区域堵塞或堵塞的诊断

消息。对过程的分析允许真正的基于状态的维护。

结合降噪和频谱信号处理（SSP），提供准确稳定的测量。

横河电机的数字YEWFLO易于集成到您现有的系统中。

横河电机DY0-DALAA040-2D涡街流量计型号和后缀代码

横河电机涡街流量计DY DY

涡街流量计（整体式，远程型探测器）

减速孔型有两种减速器规格（/R1 和 /R2），因此可以根据应用使用。

与法兰管道的公称直径相比，/R1 检测部件的公称直径减小 1 个尺寸，/R2 的公称直径减小 2 个尺寸。

法兰管道的公称直径与探测器的公称直径之间的关系如下所示。

数字YEWFLO涡街流量计缩小孔型-丝束产品阵容

缩小孔径型有助于在标准类型难以测量的低流速下进行稳定的流量测量。

下面显示了标准型和两种减速器规格的可测量流量范围示例。

digitalYEWFLO涡街流量计缩小孔型-2种阵容-流量范围

在标准型中，可测量的流量范围为 74 至 1,876 kg/h，这在要测量的流量范围很宽时是理想的选择。

如果要测量低于 74 kg/h 的低流量，则适合 R2 型减速孔。

此外，如果您想测量与标准型一样宽的流量以及低于 74 kg/h 的低流量区域，则适合缩小孔径类型 R1 规格。

横河电机DY040-DALAA2-0D涡街流量计

【英文介绍】

Yokogawa DY000-DALAA040-2D vortex flowmeter

Advanced self-diagnostics provide diagnostics for high vibration environments, excessive flow fluctuations, and clogged or blocked areas around the falling rod

Message. Analysis of the process allows for true state-based maintenance.

The combination of noise reduction and spectrum signal processing (SSP) provides accurate and stable measurements.

Yokogawa's digital YEWFLO is easy to integrate into your existing systems.

Yokogawa DY0-DALAA040-2D vortex flowmeter model and suffix code

Yokogawa vortex flowmeter DY DY

Vortex flowmeter (integrated, remote detector)

The reducer pass is available in two reducer sizes (/R1 and /R2), so it can be used according to the application.

Compared with the nominal diameter of the flanged pipe, the nominal diameter of the /R1 detection component is reduced by 1 dimension and the nominal diameter of the /R2 is reduced by 2 dimensions.

The relationship between the nominal diameter of the flange pipe and the nominal diameter of the detector is shown below.

The digital YEWFLO Vortex flowmeter Narrows the pass-tow product lineup

The reduced aperture type facilitates stable flow measurement at low flow rates that are difficult to measure with standard types.

Examples of measurable flow ranges for standard and two reducer specifications are shown below.

digitalYEWFLO Vortex flowmeter reduces pass profile -2 lineups - flow range

In the standard model, the flow range that can be measured is 74 to 1,876 kg/h, which is ideal when the flow range to be measured is wide.

If low flow rates below 74 kg/h are to be measured, the R2 reduction hole is suitable.

In addition, if you want to measure flow rates as wide as the standard type and low flow areas below 74 kg/h, the reduced aperture type R1 specification is suitable.

横河电机DY040-DALAA2-0D涡街流量计

【其他型号推荐】