横河电机DY015涡街流量计 安装缩径管

【产品详情】

横河电机DY015涡街流量计DY015

说明

横河电机DY015涡街流量计DY015

缩径型

缩径型DY流量计专门为测量低流量而设计，无需再另外安装缩径管。在DY实际应用中，使用比管道线路内径小的流量计非常普遍，需要保证DY被安装于直管合适的位置上，即DY前后的直管长度要在规定长度以上，这样才能确保进入流量计的流体是均匀分布的。同心缩径管可选择小1-2个档的管径尺寸，这样流量计和管道尺寸可以保持一致，因此能降低安装成本。 

远程型

Remote

远程型电子设备可以将显示器放置在远离过程测量点，且更加清晰可见的区域。远程型DY涡街流量计有多种不同的尺寸，从1/2英寸到16英寸不等。 根据客户的需求可提供夹持型或法兰型（ANSI 150~900级）等多种样式。

高压型

高压型DY主要适用于极端工况下的测量，如高压蒸汽和水。高压型DY可与ANSI 900＃、1500＃和2500＃法兰连接，其质量好、可靠性高，压力额定值可达5000磅。

横河电机DY015涡街流量计 安装缩径管

【英文介绍】

Yokogawa DY015 vortex flowmeter DY015

Instructions

Yokogawa DY015 vortex flowmeter DY015

Reduced bore

The reduced diameter DY flowmeter is designed to measure low flow rates without the need for additional reduced pipe installation. In the practical application of DY, it is very common to use a flowmeter smaller than the inner diameter of the pipeline line, and it is necessary to ensure that DY is installed in the right position of the straight pipe, that is, the length of the straight pipe before and after DY should be above the specified length, so as to ensure that the fluid entering the flowmeter is evenly distributed. Concentric reduced pipe can be selected 1-2 smaller pipe diameter size, so that the flow meter and pipe size can be consistent, so that installation costs can be reduced.

Long-range version

Remote

Remote electronic devices can place the display in a more visible area away from the process measurement point. Long range DY vortex flowmeters are available in a variety of sizes, from 1/2 "to 16". According to the needs of customers can provide gripper or flange type (ANSI 150~900 grade) and other styles.

High pressure type

The high pressure DY is mainly suitable for measurement under extreme conditions, such as high pressure steam and water. The high pressure DY can be connected with ANSI 900 #, 1500 # and 2500 # flanges for high quality, high reliability and pressure ratings up to 5000 LBS.

横河电机DY015涡街流量计 安装缩径管

【其他型号推荐】