6ES7407-0KA02-0AA0 控制系统模块 提供稳定且可靠的电源供应

☆型号：6ES7407-0KA02-0AA0  控制系统模块    提供稳定且可靠的电源供应

【产品详情】

西门子电源， 机架安装， 120 至 230V AC/DC 电源电压 - SIMATIC 系列 - 6ES7407-0KA02-0AA0

使用这款西门子电源启动并运行您的控制系统模块。该装置将输入电压转换为 5 和 24V 直流负载，调整电源以在瞬间与您的系统配合使用。凭借其短路保护功能，该器件可在电源故障弹出时将其切断，从而降低硬件损坏的风险。安装模块时无需任何时间，因为它可以滑到标准机架（例如 226-3954）上。LED 指示灯值班，一目了然地显示输入和故障状态，使检查变得无忧。此类电源是食品生产线和流体管理系统中必不可少的套件。

优势和特点

• 功率损耗仅为 20W，可最大限度地减少能源浪费

• 在电源故障后继续运行长达 20 毫秒，减少不稳定连接造成的中断

• 输入和输出之间内置电位分离，可防止浪涌损坏•

简单的 3 线电气连接，可快速安装

【英文介绍】

Siemens power supply, rack mount, 120 to 230V AC/DC power supply voltage - SIMATIC Series - 6ES7407-0KA02-0AA0

Get your control system module up and running with this Siemens power supply. The unit converts input voltages to 5 and 24V DC loads, adjusting the power supply to work with your system in a flash. With its short-circuit protection, the device cuts off the power supply when it fails to eject, reducing the risk of hardware damage. It takes no time to install the module, as it can slide onto a standard rack (e.g. 226-3954). The LED indicator is on duty, showing the input and fault status at a glance, making the inspection worry-free. This type of power supply is an essential kit in food production lines and fluid management systems.

Advantages and characteristics

• Power loss of only 20W minimizes energy waste

• Continue to operate for up to 20 milliseconds after a power failure, reducing interruptions caused by unstable connections

• Built-in potential separation between input and output to prevent surge damage •

Simple 3-wire electrical connection for quick installation

【其他型号推荐】