140DRA84000C 离散量输出模块 16 O

【产品详情】

140 DRA 84 000 继电器模块不需要外部电源。功耗为 5.5 W + 0.5 W x 输入点开启。140 DRA 84 000 所需的总线电流为 1100 mA。I/O 映射：1 个输出字。Modicon 继电器模块的交流工作电压为 20 ...250 VAC，直流工作电压为 5 ...30 伏直流电：30 ...150 VDC，负载电流降低。

140 DRA 84 000 的特点

Modicon 140 DRA 84 000 具有一个 LED，在运行时显示绿色。当通道处于活动状态时，通道 1 到 16 的 LED 指示绿色。在 LED 上方的 140 DRA 84 000 的正面是可以识别型号、型号描述和型号颜色代码的区域。140 DRA 84 000 继电器模块前面板上的 LED 下方是保险丝切口区域。保险丝切口区域的正下方是现场接线端子排。继电器公共 1 至 16 的接线位于模块的左前方，输出 1 至 16 位于 Modicon 140 DRA 84 000 模块的右前方。

每个点的最大负载电流为每点 2 安培，最大值为 2 VAC，30 VDC 环境温度为 60 °C。1 A 钨丝灯负载 1 A @ 功率因数 0.4 1/8 hp @ 125 / 250 VAC。每个点的最大负载电流为 30 ...150 VDC 为 300 mA（静止负载），100 mA（L/R = 10 毫秒）。最大负载电流（浪涌电流）为 10 A 容性负载 @ t = 10 ms。

在使用潜在有害、危险或有毒的设备时，人身和环境安全至关重要。考虑到这一点，140 DRA 84 000 以及该系列的其他模块提供保形涂层版本 140 DRA 84 000C。该继电器分立式输出模块还满足各种机构的广泛要求标准，包括：

UL 508认证

CSA 22.2-142 认证

C-UL认证

工厂互助 I 类，II 类

CE认证

CSA I 类，II 类

施耐德电气 140 DRA 84 000 模块具有 C-Tick、GOST 和 ABS 认证。

140DRA84000C 离散量输出模块 16 O

【英文介绍】

The 140 DRA 84 000 relay module does not require an external power supply. Power consumption is 5.5 W + 0.5 W x Input point on. The bus current required for the 140 DRA 84 000 is 1100 mA. I/O mapping: 1 output word. The Modicon relay module has an AC operating voltage of 20... 250 VAC, DC operating voltage is 5... 30 volts DC: 30... 150 VDC, load current reduction.

Features of 140 DRA 84 000

The Modicon 140 DRA 84 000 has an LED that displays green when running. When channels are active, leds for channels 1 through 16 indicate green. On the front of the 140 DRA 84 000 above the LED is an area that identifies the model, model description, and model color code. 140 DRA 84 000 Below the LED on the front panel of the relay module is the fuse cut area. Directly below the fuse incision area is the field terminal block. The relays common 1 to 16 wires are located on the left front of the module, and the outputs 1 to 16 are located on the right front of the Modicon 140 DRA 84 000 module.

The maximum load current at each point is 2 amps per point, the maximum is 2 VAC, and the 30 VDC ambient temperature is 60 °C. 1 A tungsten lamp load 1 A @ Power factor 0.4 1/8 hp @ 125/250 VAC. Maximum load current at each point is 30... 150 VDC is 300 mA (static load), 100 mA (L/R = 10 milliseconds). The maximum load current (surge current) is 10 A capacitive load @t = 10 ms.

Personal and environmental safety is Paramount when using potentially harmful, dangerous or toxic equipment. With this in mind, the 140 DRA 84 000, as well as other modules in the series, are available in the conformal coating version 140 DRA 84 000C. The relay discrete output module also meets a wide range of required standards for a variety of mechanisms, including:

UL 508 certification

CSA 22.2-142 certification

C-UL certification

Factory mutual aid Class I, Class II

CE certification

CSA Class I, Class II

The Schneider Electric 140 DRA 84 000 module is C-Tick, GOST and ABS certified.

140DRA84000C 离散量输出模块 16 O

【其他型号推荐】