140DAO84210 离散输出的交流离散输出模块

【产品详情】

特征

140DAO84210 Modicon 模块及其组件由一个前面板组成，该面板在顶部中心显示型号、模块描述和颜色代码。在顶部的型号下方，您会找到 LED 显示屏。在模块的正面，在中间，您会发现保险丝切口。保险丝切口区域是固定现场接线端子排的地方。请注意，现场接线端子排需单独订购。端子排包括一个门和一个标签。门是可拆卸的。该标签用于识别目的，必须放置在条带的门内。为此，您必须将标签对折并将其放在门的翻盖内。牢固地关闭条带的门。

此 Modicon 组件是一个具有 16 个离散输出的交流离散输出模块。它带有四组四个通道，总共 16 个输出。电源频率为 47...63 Hz，最大压降为 1.5 V。该模块上的离散输出电压为 83...253 V 交流它有一个输出字寻址要求。该模块的绝对最大输出为 300 Vrms（10 s AC）和 400 Vrms 1 周期 AC。该模块的响应时间为 < = 0.5 ms（状态 0 到状态 1）和 < 0.5 ms（状态 1 到状态 0）。您可以通过检查故障指示灯来查找保险丝熔断的指示或现场电源丢失的指示。为了提供保护，它有一个内部 RC 滤波器和 5 A 保险丝的内部输出保护。

优势

自动化环境应保持在 95% 的相对湿度，无冷凝。它应该在 <= 5000 m 的高度运行。操作时，环境空气温度应在 0...60°C，储存的环境空气温度应保持在-40°C之间。85°C.遵守这些温度准则可确保本产品获得最佳效果。

Modicon 140DAO84210 具有 CUL 和 FM Class 1 Division 2 认证。

如何使用 140DAO84210

该装置的总线电流要求为 350 mA，采用标准模块格式。您会发现一个绿色 LED 总线，指示模块处于活动状态，这意味着存在通信。如果您看到红色 LED，则表示检测到外部故障。

施耐德电气品牌承载着可持续发展的承诺。它提供由主动合规性驱动的绿色优质产品。

140DAO84210 离散输出的交流离散输出模块

【英文介绍】

trait

The 140DAO84210 Modicon module and its components consist of a front panel that displays the model number, module description, and color code in the top center. Below the model at the top, you will find the LED display. On the front of the module, in the middle, you will find the fuse cut. The fuse notch area is where the onsite terminal block is secured. Please note that on-site terminal blocks need to be ordered separately. The terminal block includes a door and a label. The door is removable. The tag is used for identification purposes and must be placed inside the door of the strip. To do this, you must fold the label in half and place it inside the flap of the door. Close the strip door firmly.

This Modicon component is an AC discrete output module with 16 discrete outputs. It comes with four sets of four channels for a total of 16 outputs. Power frequency 47... 63 Hz with a maximum pressure drop of 1.5V. The discrete output voltage on this module is 83... 253 V AC It has an output word addressing requirement. The absolute maximum output of this module is 300 Vrms (10 s AC) and 400 Vrms 1 cycle AC. The response time of the module is < = 0.5ms (state 0 to state 1) and < 0.5ms (state 1 to state 0). You can look for an indication of a blown fuse or a loss of power in the field by checking the fault light. To provide protection, it has an internal RC filter and internal output protection of 5 A fuses.

advantage

The automation environment should be maintained at 95% relative humidity without condensation. It should operate at an altitude of <= 5000 m. When operating, the ambient air temperature should be 0... 60°C, the stored ambient air temperature should be maintained between -40°C. 85°C. Compliance with these temperature guidelines ensures optimal results for this product.

The Modicon 140DAO84210 is CUL and FM Class 1 Division 2 certified.

How to use 140DAO84210

The device requires a bus current of 350 mA in a standard module format. You will find a green LED bus indicating that the module is active, which means there is communication. If you see a red LED, an external fault has been detected.

The Schneider Electric brand carries a commitment to sustainability. It offers green quality products driven by proactive compliance.

140DAO84210 离散输出的交流离散输出模块

【其他型号推荐】