140AVI03000 模拟输入模块 多量程 SCHNEIDER
【产品详情】
Modicon 140AVI03000 是一款模拟输入模块,设计用于昆腾自动化平台。它旨在促进PLC与模拟设备(如温度传感器、压力传感器和流量计)之间的接口。
规格:
通道数: 8
输入类型:电压
输入范围:-10 至 +10 VDC
分辨率:16位
精度:满量程的±0.1%
隔离:通道到通道和通道到地
更新速率:每通道10ms
端子类型:螺丝端子
状态指示器:用于显示模块状态和通道活动的 LED
指南和手册:
安装:
确保 PLC 已关闭电源。
将模块插入昆腾背板的相应插槽。
使用提供的螺钉或夹子固定模块。
使用屏蔽双绞线电缆将模拟设备连接到模块。
配置:
使用 EcoStruxure Control Expert(以前称为 Unity Pro),创建新的硬件配置或修改现有配置。
将 140AVI03000 模块添加到配置中。
定义每个通道的范围和类型。
为每个通道分配内存地址。
诊断:模块的状态 LED 可帮助诊断问题。稳定的绿色 LED 表示模块运行正常,而闪烁或红色 LED 表示故障。
常见问题:
模块是否可热插拔?
否,在插入或卸下模块之前,请务必关闭 PLC 电源。
我可以在昆腾背板的任何插槽中使用该模块吗?
是的,该模块与所有标准昆腾背板插槽兼容。
我应该使用什么类型的电缆进行模拟连接?
使用屏蔽双绞线电缆以减少电气噪声干扰。
此模块是否有校准程序?
该模块经过工厂校准,但最好使用已知的基准电压定期检查其精度。
在哪里可以获得模块的最新驱动程序?
驱动程序和更新可以从施耐德电气的官方网站下载。
140AVI03000 模拟输入模块 多量程 SCHNEIDER
【英文介绍】
The Modicon 140AVI03000 is an analog input module designed for use on the Quinten Automation platform. It is designed to facilitate the interface between PLCS and analog devices such as temperature sensors, pressure sensors and flow meters.
Specifications:
Number of channels: 8
Input type: Voltage
Input range: -10 to +10 VDC
Resolution: 16 bits
Accuracy: ±0.1% of full scale
Isolation: channel to channel and channel to ground
Update rate: 10ms per channel
Terminal type: screw terminal
Status Indicator: LED for displaying module status and channel activity
Guides and manuals:
Installation:
Make sure the PLC is powered off.
Insert the module into the appropriate slot on the Quinten backplane.
Secure the module using the screws or clamps provided.
Connect the analog device to the module using a shielded twisted pair cable.
Settings:
Using EcoStruxure Control Expert (formerly known as Unity Pro), create a new hardware configuration or modify an existing one.
Add the 140AVI03000 module to the configuration.
Define the scope and type of each channel.
Allocate a memory address for each channel.
Diagnostics: Module status leds help diagnose problems. A steady green LED indicates that the module is operating normally, while a blinking or red LED indicates a fault.
Common problems:
Is the module hot swappable?
No, be sure to turn off the PLC power before inserting or removing the module.
Can I use this module in any slot on the Quinten backplane?
Yes, the module is compatible with all standard Quinten backplane slots.
What type of cable should I use for analog connections?
Use shielded twisted pair cables to reduce electrical noise interference.
Is there a calibration procedure for this module?
The module is factory calibrated, but it is best to check its accuracy regularly using a known reference voltage.
Where can I get the latest drivers for the module?
Drivers and updates can be downloaded from Schneider Electric's official website.
140AVI03000 模拟输入模块 多量程 SCHNEIDER
【其他型号推荐】
TRICONEX 3664 | Triconex DCS | 输入输出模块 | BENTLY 3500/15127610-01 | 存储器模块 | Bently Nevada |
TRICONEX 3625 | Triconex DCS | PLC中央处理器 | BENTLY 3500/15125760-01 | 数字信号输入输出模块 | Bently Nevada |
TRICONEX 3624 | Triconex DCS | DO模块 | BENTLY 3500/15-05-05-00 | 伺服驱动 | Bently Nevada |
TRICONEX 3511 | Triconex DCS | 控制处理器 | BENTLY 3500/15-05-00-00 | 安全继电器 | Bently Nevada |
TRICONEX 3510 | Triconex DCS | 数字输入模件 | BENTLY 3500/15-02-02-00 | 绕线式 | Bently Nevada |
TRICONEX 3451 | Triconex DCS | 开关量输入卡 | BENTLY 3500/15-02-00-00 | 处理器 | Bently Nevada |
TRICONEX 3401 | Triconex DCS | 卡件 | BENTLY 3500/15-02-00 | 模件 | Bently Nevada |
TRICONEX 3351 | Triconex DCS | DI卡件 | BENTLY 3500/15-01-01-00 | 交流伺服马达驱动器 | Bently Nevada |
TRICONEX 3301 | Triconex DCS | DI卡件 | BENTLY 3500/15-01-00-00 | 模拟量输出模块 | Bently Nevada |
TRICONEX 3201 | Triconex DCS | DI卡件 | BENTLY 3500/15 127610-01S | 网络接口从站模块 | Bently Nevada |
TRICONEX 3101 | Triconex DCS | 增强型智能通信模件 | BENTLY 3500/15 125760-01 | HCU柜模件 | Bently Nevada |
TRICONEX 3008 | Triconex DCS | 模拟量输入模块 | BENTLY 3500/15 | 多功能处理器端接模块 | Bently Nevada |
TRICONEX 3007 | Triconex DCS | CPU模块 | BENTLY 3500/149992-01 | 备件模块 | Bently Nevada |