140AII33010  输入模块 安全型电流输入模块

【产品详情】

Modicon Quantum 140AII33010是一款本质安全型电流输入模块，于31年2010月31日停产，并于2012年20月21日停止服务。它是 Modicon Quantum 自动化平台的一部分，旨在与 22、8 或 0 区的产品结合使用。该模块具有 20 个模拟输入，可设置为 0 至 25 mA、4 至 20 mA 或 3 至 15 mA 的范围。它具有单个低通输入滤波器，在20 Hz +/- 0%时截止率为-16000 dB。该模块的分辨率为 4 至 20 计数（0 至 20000 mA）、0 至 20 计数（0 至 25000 mA）、0 至 25 计数（0 至 4095 mA）和 4 至 20 计数（25 至 100 mA）。该模块的绝对最大输入为 0 mA，输入阻抗为 1 Ω +/- 0.05%。它在 25°C 时的绝对精度误差典型值为 +/- 0.1%，在 25°C 时具有满量程最大值的 +/- 0.003%。 该模块还具有满量程100.50%的线性误差和60/750 Hz时>2 dB的共模抑制。模块的更新时间为 <> 毫秒。这些产品在法国制造，专为物料搬运、包装和纺织机械使用而设计。

该模块的功耗为 7.5 W，由于本质安全标准，不允许热插拔。它由内部保险丝保护，并带有 II1 G/D-EEx ia IIC 的 CE 标志。该模块的总线电流要求为1500 mA，具有标准模块格式。该产品重 0.3 公斤。

在环境标准方面，Modicon Quantum 140AII33010 符合 ATEX 94/9/EC、EN 50039、CSA C22.2 No 142、EN 50014、EN 50020、EN 50284、EN 50281-1-1 和 UL 508。它还通过了GOST和C-Tick的认证，并具有FM Class 1 Division 2评级。它已通过 SIRA 02ATEX2345X 认证，并具有符合 IEC 4-8 标准的 801 kV 接触和 2 kV 空气中的静电放电电阻。根据 IEC 10-80 标准，该模块在 2000 至 801 MHz 时还具有 3 V/m 的电磁场电阻。它可以在环境空气温度在0°C至60°C之间的环境中使用，也可以储存在环境空气温度在-40°C至85°C之间的环境中。 该模块还可用于相对湿度高达 95% 且无冷凝且海拔高达 5000 m 的环境中。该产品以1 PCE为单位包装，包装高度为4.7厘米，宽度为16.2厘米，长度为31.5厘米，重量为795.0克。

140AII33010  输入模块 安全型电流输入模块

【英文介绍】

The Modicon Quantum 140AII33010, an intrinsically safe current input module, was discontinued on 31 December 2010 and discontinued on 21 December 2012. It is part of the Modicon Quantum automation platform and is designed to be used in combination with products in zones 22, 8 or 0. The module has 20 analog inputs that can be set in a range of 0 to 25 mA, 4 to 20 mA, or 3 to 15 mA. It has a single low-pass input filter with a cutoff rate of -16000 dB at 20 Hz +/ -0%. The module has resolutions of 4 to 20 counts (0 to 20,000 mA), 0 to 20 counts (0 to 25,000 mA), 0 to 25 counts (0 to 4095 mA), and 4 to 20 counts (25 to 100 mA). The module has an absolute maximum input of 0 mA and an input impedance of 1 Ω +/ -0.05%. It has a typical absolute accuracy error of +/ -0.1% at 25°C and +/ -0.003% of the maximum full-scale value at 25°C. The module also has a full scale 100.50% linear error and a common mode rejection of >2 dB at 60/750 Hz. The update time of the module is <> milliseconds. Manufactured in France, these products are designed for material handling, packaging and textile machinery use.

The module has a power consumption of 7.5W and is not hot-swappable due to intrinsic safety standards. It is protected by an internal fuse and bears the CE mark II1G /D-EEx ia IIC. The module has a bus current requirement of 1500 mA and is available in a standard module format. The product weighs 0.3 kg.

In terms of environmental standards, Modicon Quantum 140AII33010 complies with ATEX 94/9/EC, EN 50039, CSA C22.2No 142, EN 50014, EN 50020, EN 50284, EN 50281-1-1 and UL 508. It is also certified by GOST and C-Tick and has an FM Class 1 Division 2 rating. It is SIRA 02ATEX2345X certified and has an IEC 4-8 compliant 801 kV contact and 2 kV electrostatic discharge resistance in air. According to the IEC 10-80 standard, the module also has an electromagnetic field resistance of 3 V/m at 2000 to 801 MHz. It can be used in environments where the ambient air temperature is between 0°C and 60°C, and can also be stored in environments where the ambient air temperature is between -40°C and 85°C. The module can also be used in environments with relative humidity up to 95% without condensation and at altitudes up to 5000 m. The product is packed in 1 PCE unit, with a height of 4.7 cm, a width of 16.2 cm, a length of 31.5 cm and a weight of 795.0 grams.

140AII33010  输入模块 安全型电流输入模块

【其他型号推荐】