140CPS11420  7点端子连接器 115 V/230 V AC

【产品详情】

施耐德电气 140CPS11420 是昆腾自动化平台中的 Modicon 电源模块。它可以使用汇总或独立电源类型。该模块具有内部输出过压和过载保护。它采用标准模块格式，重量为 0.65 kg。在独立配置中，140-CPS-114-20 使用的最大电流为 11 安培。在汇总配置中，模块的最大电流为 20 安培。满载时其内部功耗小于 12 W。这些产品在法国制造，专为物料搬运、包装和纺织机械使用而设计。它们提供MRO电气的2年保修。我们还提供来自其他制造商的电源，如Modicon和ABB。

特征

电源端子条的端子 220 和 6 上提供额定值为 30 伏交流电、5 安培/1 伏直流电、2A 的常闭继电器触点。该触点组可用于发出输入电源关闭信号。当输入功率降至 70 伏交流电以下时，当输入电压设置为 115 伏交流电时，继电器将断电，当输入设置为 140 伏交流电时，继电器将断电。其对总线的输出为 230.5 伏直流电。无最小电流要求。模块的输入频率范围为 1 - 47 Hz。 63CPS140的输入电压总谐波失真小于基本均方根值的11420%。在满载时，在10/1周期内，在最小额定线路电压和频率下，输入功率中断不小于1秒。

如何使用 Modicon 140CPS11420

在插入或卸下模块之前，请先拔下电源线。如上所述，在昆腾背板中仅使用兼容的可汇总电源和独立电源组合。如果不采取这些预防措施，可能会发生严重伤害和/或设备损坏。

优势

昆腾 CPU 是昆腾本地 I/O 背板上使用的模块。此 CPU 使用可编程内存。Modicon 140CPS11420使用可编程存储器进行用户指令的内部存储。您可以实现特定功能，例如：逻辑、过程排序、定时、耦合、算术。MOdicon 140CPS11420 上的可编程信息可让您通过数字和模拟输出控制各种类型的机器和过程。昆腾CPU是控制Modicon Quantum系统的本地，远程和分布式I / O的总线主机。

 140CPS11420  7点端子连接器 115 V/230 V AC

【英文介绍】

The Schneider Electric 140CPS11420 is the Modicon power module in the Quinten Automation platform. It can use summary or standalone power supply types. The module has internal output overvoltage and overload protection. It comes in a standard module format and weighs 0.65 kg. In a standalone configuration, the 140-CPS-114-20 uses a maximum current of 11 amps. In the summary configuration, the maximum current of the module is 20 amps. At full load, its internal power consumption is less than 12 W. Manufactured in France, these products are designed for material handling, packaging and textile machinery use. They come with a 2-year warranty on MRO Electric. We also supply power supplies from other manufacturers such as Modicon and ABB.

trait

Normally closed relay contacts rated 30 volts AC, 5 amps /1 volt DC, 2A are provided on terminals 220 and 6 of the power terminal strip. The contact group can be used to signal input power off. When the input power drops below 70 volts AC, the relay will be powered off when the input voltage is set to 115 volts AC, and the relay will be powered off when the input is set to 140 volts AC. Its output to the bus is 230.5 volts DC. No minimum current requirement. The input frequency range of the module is 1-47 Hz. The total harmonic distortion of the input voltage of 63CPS140 is less than 11420% of the basic root-mean-square value. At full load, the input power is interrupted for not less than 1 second in a 10/1 cycle at the minimum rated line voltage and frequency.

How to use Modicon 140CPS11420

Remove the power cable before inserting or removing the module. As mentioned above, only compatible aggregable power supplies and separate power supply combinations are used in a Quinten backplane. If these precautions are not taken, serious injury and/or equipment damage may occur.

advantage

The Quinten CPU is the module used on the Quinten local I/O backplane. This CPU uses programmable memory. The Modicon 140CPS11420 uses programmable memory for internal storage of user instructions. You can implement specific functions such as: logic, procedure ordering, timing, coupling, arithmetic. The programmable information on the MOdicon 140CPS11420 allows you to control various types of machines and processes through digital and analog outputs. The Quinten CPU is the bus host that controls the local, remote, and distributed I/O of the Modicon Quantum system.

 140CPS11420  7点端子连接器 115 V/230 V AC

【其他型号推荐】