Reliance Electric 0-57405-C 模拟 I/O 驱动模块

【产品详情】

0-57405- 型号是由 Reliance Electric 公司开发的模拟 I/O 驱动模块，该公司现在称为罗克韦尔自动化。 与 Reliance Electric 的许多设备一样，0-57405- 模拟 I/O 驱动器已停产。

在 0-57405- 模拟 I/O 驱动器面板的顶部，有一个小状态指示灯，标记为“OVER SPEED CALIBRATION”指示灯。在这个指示灯的下方，有一个小的母并口。此并行端口标记为“TO PMI”端口。如果你看下面这个小的母并行端口，你会发现一排十个USB端口。这些 USB 端口标有数字 1 到 10。面板的顶部和底部以及 0-57405- 模拟 I/O 驱动器的背面都有螺钉。这些螺钉可用于将 0-57405- 模拟 I/O 驱动器安全地固定到您选择的安装位置。

Reliance Electric 0-57405-C 模拟 I/O 驱动模块

【英文介绍】

The 0-57405- model is an analog I/O drive module developed by Reliance Electric, now known as Rockwell Automation. Like many of Reliance Electric's devices, the 0-57405-analog I/O drive has been discontinued.

At the top of the 0-57405-Analog I/O driver panel, there is a small status indicator labeled "OVER SPEED CALIBRATION" indicator. Below this indicator light, there is a small female port. This parallel port is labeled as the "TO PMI" port. If you look at the small female parallel port below, you will find a row of ten USB ports. These USB ports are marked with the numbers 1 to 10. There are screws on the top and bottom of the panel and on the back of the 0-57405-analog I/O driver. These screws can be used to securely secure the 0-57405-analog I/O drive to the installation location of your choice.

Reliance Electric 0-57405-C 模拟 I/O 驱动模块

【其他型号推荐】