0-57406-E Reliance Electric 驱动控制器 用于控制 AutoMax 系列

【产品详情】

0-57406- 模块是 Reliance Electric 驱动控制器。

0-57406- 驱动控制器用于控制 AutoMax 系列 PLC 和相关设备中的系统。在 0-57406- 驱动器控制器面板的顶部，有一个黄色按钮，上面写着“故障代码”字样。在它下面，有一个绿色的小 LED 指示灯，右侧标有黑色文字“OK”。再往下走 0-57406- 驱动器控制器，有一个标记为“TEST SWITCH”的小开关。测试开关总共有三个位置，恰当地标有数字 1、2 和 3。在它下面，有一个小的重置按钮。继续往下看，0-57406 驱动器控制器的面板上有三个大小大致相同的母并行端口，但每个端口都有不同的用途。顶部标记为“TO POWER MODULE INTERFACE”端口，第二个标记为“GATE CONNECTION BOX 2”端口，最后一个标记为“GATE CONNECTION BOX 1”端口。

0-57406- 驱动器控制器的重量估计为 2.00 磅或 0.91 千克，不包括我们将用于容纳设备的任何包装材料。

0-57406-E Reliance Electric 驱动控制器 用于控制 AutoMax 系列

【英文介绍】

0-57406- Module is Reliance Electric drive controller.

0-57406- Drive controllers are used to control systems in the AutoMax family of PLCS and related equipment. At the top of the 0-57406- Driver controller panel, there is a yellow button with the words "Fault code" written on it. Below it, there is a small green LED indicator with the word "OK" in black text on the right. Further down the road 0-57406- Drive controller, there is a small SWITCH labeled "TEST SWITCH". The test switch has a total of three positions, appropriately marked with the numbers 1, 2, and 3. Underneath it, there's a small reset button. Moving on, the panel of the 0-57406 driver controller has three female parallel ports of roughly the same size, but each port serves a different purpose. The top is labeled as the "TO POWER MODULE INTERFACE" port, the second is labeled as the "GATE CONNECTION BOX 2" port, and the last is labeled as the "GATE CONNECTION BOX 1" port.

0-57406- The weight of the driver controller is estimated to be 2.00 pounds or 0.91 kg, excluding any packaging materials we will use to house the device.

0-57406-E Reliance Electric 驱动控制器 用于控制 AutoMax 系列

【其他型号推荐】