Reliance Electric 45C911 四插槽机架 与各种模块兼容

【产品详情】

45C911 单元是由 Reliance Electric 制造的机架，用于与 Shark XL 系列中的各种模块兼容

45C911 机架被指定为 Shark XL 系列的四插槽机架，但实际上它总共有五个插槽。45C911 机架的五个插槽之一设计用于容纳 Shark XL 电源模块。其余的插槽用于容纳 Shark XL 系列的 I/O 和处理器模块。

45C911 机架顶部有两个小安装孔。 这些孔用于使 45C911 机架的安装过程快速、简单。 除安装孔外，45C911 机架的每个插槽都有一个背板连接器。在 45C911 机架的侧面，您会发现一个扩展连接器。如果您想将此机架与另一个 Shark XL 机架连接以扩展模块的插槽数量，则此连接器非常有用。

45C911 机架具有简单的安装过程。您需要找到一个可以安装 45C911 机架的平面并将其安装到该机架上。所有 Shark XL 机架重量都很轻，最大的机架仅重 2.59 磅或 1.18 千克。但是，请注意，机架的重量会随着安装在其中的每个模块而增加。确保您的面板能够支撑机架和放置在其中的模块的重量。机架应使用 M4 或 #8 盘头螺钉安装。

Reliance Electric 45C911 四插槽机架 与各种模块兼容

【英文介绍】

The 45C911 unit is a rack manufactured by Reliance Electric for compatibility with various modules in the Shark XL series

The 45C911 rack is designated as a four-slot rack for the Shark XL series, but it actually has a total of five slots. One of the five slots in the 45C911 rack is designed to accommodate the Shark XL power module. The remaining slots are used to house the Shark XL series I/O and processor modules.

The 45C911 frame has two small mounting holes at the top. These holes are used to make the installation process of the 45C911 rack quick and easy. In addition to mounting holes, each slot of the 45C911 rack has a backplane connector. On the side of the 45C911 frame, you will find an expansion connector. This connector is useful if you want to connect this rack to another Shark XL rack to expand the number of slots for your modules.

The 45C911 rack has a simple installation process. You need to find a surface on which the 45C911 rack can be mounted and mount it to the frame. All Shark XL racks are lightweight, with the largest weighing just 2.59 pounds or 1.18 kilograms. Note, however, that the weight of the rack increases with each module installed in it. Make sure your panel can support the weight of the rack and the modules placed in it. The frame should be mounted using M4 or #8 pan head screws.

Reliance Electric 45C911 四插槽机架 与各种模块兼容

【其他型号推荐】