MVI56-DNP 现场设备连接  高效传输和数据传输

【产品详情】

ProSoft MVI56-DNP DNP 3.0 主/从网络接口模块具有 1 个插槽和梯形逻辑数据传输。该模块具有本地或远程机架类型和 110-115200 波特率。

MVI56-DNP 是由 InRAx 开发的主从通信网络接口模块，允许支持 ControlLogix 的处理器与支持 DNP（分布式网络协议）的现场设备连接。MVI56-DNP 由该器件的 DNP 子集 2 级功能提供支持，可实现控制命令的高效传输和数据传输。这样可以极大地提高连接的 ControlLogix 处理器和现场设备之间的数据传输速度和质量。MVI56-DNP 从控制逻辑传输的数据传输与 DNP 网络操作是异步的。MVI56-DNP 接口模块采用双 DNP 协议端口，易于使用。

通信额定值范围在 110 到 115200 波特之间。MVI56-DNP 的额定电压范围为 5 至 24 伏直流电。MVI56-DNP 的额定电流范围为 3 至 800 mA。MVI56-DNP 的工作温度要求为 32 至 140 华氏度。MVI56-DNP 的预配置驱动器设置可以从 PC 下载并安装在模块上。输入和输出数据块可以单独监控并映射到 MVI56-DNP 的数据存储器上，以实现最大的灵活性和效率。对于模块和处理器之间的数据传输，MVI56-DNP 使用梯形逻辑。该器件具有本地和远程机架选项以及可配置的 I/O 背板。MVI56-DNP 具有配置/调试串行端口，允许从 PC 和平板电脑设备进行状态检查、监控、配置和故障排除等各种操作。MVI56-DNP 在发货时随附用于此目的的串行电缆，以及手册和安装部件。

MVI56-DNP 现场设备连接  高效传输和数据传输

【英文介绍】

ProSoft MVI56-DNP DNP 3.0 Master/slave network interface module with 1 slot and ladder logic data transfer. The module is available in local or remote rack types and 110-115200 baud rates.

The MVI56-DNP is a master-slave communication network interface module developed by InRAx that allows Controllogix-enabled processors to connect to field devices that support DNP (Distributed Networking Protocol). The MVI56-DNP is supported by the DNP subset Level 2 functionality of the device for efficient transfer of control commands and data. This can greatly improve the speed and quality of data transfer between connected ControlLogix processors and field devices. MVI56-DNP Data transfer from the control logic is asynchronous with DNP network operations. The MVI56-DNP interface module uses dual DNP protocol ports and is easy to use.

Communication ratings range from 110 to 115,200 baud. The MVI56-DNP has a rated voltage range of 5 to 24 volts DC. The MVI56-DNP has a rated current range of 3 to 800 mA. The MVI56-DNP is required to operate at a temperature of 32 to 140 degrees Fahrenheit. The pre-configured drive Settings for the MVI56-DNP can be downloaded from the PC and installed on the module. Input and output data blocks can be individually monitored and mapped to the MVI56-DNP's data memory for maximum flexibility and efficiency. For data transfer between modules and processors, the MVI56-DNP uses ladder logic. The device has local and remote rack options and a configurable I/O backplane. The MVI56-DNP has a configuration/debug serial port that allows a variety of operations from PC and tablet devices such as status checking, monitoring, configuration, and troubleshooting. The MVI56-DNP is shipped with a serial cable for this purpose, along with a manual and mounting parts.

MVI56-DNP 现场设备连接  高效传输和数据传输

【其他型号推荐】