PROSOFT MVI56-PDPS I/O 从属网络接口

MV156-PDPS 从站通信网络接口模块是 InRAx 制造的接口设备，开发用于允许支持 ControlLogix 的处理器与 PROFIBUS DP 主站设备连接。MV156-PDPS 由 PROFIBUS VO 从站实施支持，可显着提高连接的 ControlLogix 处理器和模块之间的数据传输速度和质量。MV156-PDPS 具有可由用户配置的数据映射功能。借助 DP 操作端口，MV156-PDPS 接口模块易于使用。为了更轻松地与 PC 接口，MV156-PDPS 具有配置/调试串行端口，可以进行状态检查、监控和配置以及故障排除等各种操作。用于此目的的串行电缆在出厂时随模块一起提供。

MV156-PDPS 的额定电压范围为 5 至 24 伏直流电。MV156-PDPS 的电流额定值范围在 3 到 800 mA 之间，通信额定值范围在 110 到 115200 波特之间。MV156-PDPS 的工作温度要求为 32 至 140 华氏度。MV156-PDPS 的预配置驱动设置可以从 PC 下载并安装到模块上。PROFIBUS DP Slave 的输入和输出限制为 200 个字符(无图像)和 122 个字符(有图像)。输入和输出数据块可以单独监控并映射到模块的数据存储器中，以实现最大的灵活性和效率。对于模块和处理器之间的数据传输，MV156-PDPS 使用梯形逻辑。该设备带有本地和远程机架选项以及可配置的 I/O 背板。

The MV156-PDPS Slave Station Communication Network interface module is an InRAx-manufactured interface device developed to allow Controllogix-enabled processors to connect to PROFIBUS DP master station devices. The MV156-PDPS is supported by the PROFIBUS VO slave implementation, which significantly improves the speed and quality of data transfer between connected ControlLogix processors and modules. The MV156-PDPS has a user-configurable data mapping function. With the DP operating port, the MV156-PDPS interface module is easy to use. For easier interface with the PC, the MV156-PDPS has a configuration/debug serial port for various operations such as status checking, monitoring and configuration, and troubleshooting. A serial cable for this purpose is supplied with the module at the factory.

The MV156-PDPS has a rated voltage range of 5 to 24 volts DC. The MV156-PDPS has current ratings ranging from 3 to 800 mA and communication ratings ranging from 110 to 115,200 baud. The MV156-PDPS is required to operate at temperatures ranging from 32 to 140 degrees Fahrenheit. The pre-configured driver Settings for the MV156-PDPS can be downloaded from the PC and installed onto the module. The PROFIBUS DP Slave's input and output are limited to 200 characters (without images) and 122 characters (with images). Input and output data blocks can be individually monitored and mapped into the module's data memory for maximum flexibility and efficiency. For data transfer between modules and processors, the MV156-PDPS uses ladder logic. The device comes with local and remote rack options and a configurable I/O backplane.