UM1LG3-110C-1AA-2SA-N/CN 伺服驱动器

【产品详情】

YOKOGAWA横河伺服驱动器 UM1LG3-130C-A-1AA-2SA-N/CN

1、换向器表面明显地不平整(用手能触觉)或电机运转时火花如第四种情况.此时需拆卸电枢，通用伺服驱动器维修，用精密机床加工转换器;

2、基本平整，只是有极小的伤痕或火花，伺服驱动器维修价格，如第二种情况l口1以用水砂纸手工研磨在不拆卸电枢的情况下研磨.研磨的顺序是:先按换向器的外圆弧度，加工一个木制的工具，将几种不同粗细的水砂纸剪成如换向器一样宽的长条，取下碳刷(请注意在取下的碳刷的柄上与碳刷槽上做记号，确保安装时不致左右换错)用裹好砂纸的木制工具贴实换向器，用另一只手按电机旋转方向，轻轻转动轴换向器研磨。伺服电机维修使用砂纸粗细的顺序先粗后细当一张砂纸瞎得不能用后，再换另较细的砂纸，直到用完最细的水砂纸(或金相砂纸)。

UM1LG3-110C-1AA-2SA-N/CN 伺服驱动器

【英文介绍】

YOKOGAWA Yokogawa servo driver UM1LG3-130C-A-1AA-2SA-N/CN

1, the surface of the commutator is obviously uneven (can be felt by hand) or the spark when the motor is running, such as the fourth case. At this time, it is necessary to disassemble the armature, repair the universal servo drive, and process the converter with a precision machine tool;

2, basically flat, only with minimal scars or sparks, servo drive maintenance price, such as the second case l port 1 with water sandpaper manual grinding without disassembling the armature grinding. The order of grinding is: first, according to the external arc of the commutator, process a wooden tool, cut several different thicknesses of water sandpaper into a long strip as wide as the commutator, remove the carbon brush (please mark the handle of the removed carbon brush and the carbon brush slot to ensure that the installation will not change wrong), use the wooden tool wrapped with sandpaper to tighten the commutator, and press the motor rotation direction with the other hand. Gently rotate the shaft commutator to grind. The order of sandpaper thickness used for servo motor maintenance is first thick and then fine. When a piece of sandpaper is blind and can not be used, then change another finer sandpaper until the finest water sandpaper (or metallographic sandpaper) is used.

UM1LG3-110C-1AA-2SA-N/CN 伺服驱动器

【其他型号推荐】