6410-024-N-N-N 步进驱动器 执行机构

【产品详情】

• 6410024NNN

• 6410系列

• 步进驱动器

• 7.1 A峰值

• 5安培均方根值

• 24-75伏直流电

步进驱动器是一种将电脉冲转化为角位移的执行机构。步进电动机和步进电动机驱动器构成步进电机驱动系统。步进电动机驱动系统的性能，不但取决于步进电动机自身的性能，也取决于步进电动机驱动器的优劣。对步进电动机驱动器的研究几乎是与步进电动机的研究同步进行的。

步进电机不能直接接到直流或交流电上工作，必须使用专门的驱动器。步进驱动器的原理是采用单极性直流电源供电，只要对步进电机的各相绕组按合适的时序通电，就能使步进电机步进转动。步进驱动器一般需要接脉冲信号，方向信号，使能信号一般不接，输出接电机A组，电机B组，调换任意A+和A-或者B+和B-可以调换电机方向，当然从程序内部也可以修改。

6410-024-N-N-N 步进驱动器 执行机构

【英文介绍】

6410024NNN

6410 Series

Stepper driver

7.1A Peak

5 amperes root mean square value

24-75 volts direct current

A stepper driver is an actuator that converts electrical impulses into angular displacement. Stepper motor and stepper motor driver constitute a stepper motor drive system. The performance of the stepper motor drive system depends not only on the performance of the stepper motor itself, but also on the quality of the stepper motor drive. The research of stepper motor driver is almost synchronized with the research of stepper motor.

Stepper motor can not be directly connected to DC or AC power work, must use a special driver. The principle of the stepper driver is to use unipolar DC power supply, as long as the phase winding of the stepper motor is energized according to the appropriate timing, it can make the stepper motor step rotation. The stepper driver generally needs to be connected to the pulse signal, the direction signal, the enable signal is generally not connected, the output is connected to the motor A group, the motor B group, the replacement of any A+ and A- or B+ and B- can be changed the direction of the motor, of course, from the program can also be modified.

6410-024-N-N-N 步进驱动器 执行机构

【其他型号推荐】