Rexroth DKC02.3-040-7-FW 交流伺服放大器驱动控制器

【产品详情】

Rexroth， Indramat， Bosch 的 DKC02.3-040-7-FW 是 DKC 系列中的交流伺服放大器驱动控制器。DKC02.3-040-7-FW 的额定电流为 40A，直流母线标称电压为 DC 700V。此伺服驱动器的版本为 3，并带有标准固件。

DKC02.3-040-7-FW 是 02 系列 3 版控制器。DKC02.3-040-7-FW 的额定电流为 40 A，而直流母线标称电压为 DC 700 V。此特定驱动器使用 SERCOS 接口进行命令通信。此驱动器上的固件在出厂时分配，性质未指定。如有必要，可以拆卸和更换固件编程模块。编程模块包含参数模块和固件模块。参数模块用于用户特定的参数，而固件模块用于特定于单元的固件。与某些DKC同类产品不同，此特定驱动器控制器不具有特定的固件版本。

如前所述，DKC02.3-040-7-FW使用SERCOS或串行实时通信系统接口。SERCOS接口有两个光纤连接，用于连接到更高级别的控制器。该驱动控制器非常适合具有多轴系统的机器，例如打印机。 保修期为一年。 

Rexroth DKC02.3-040-7-FW 交流伺服放大器驱动控制器

【英文介绍】

The DKC02.3-040-7-FW by Rexroth, Indramat, Bosch is an AC servo amplifier drive controller in the DKC series. The rated current of the DKC02.3-040-7-FW is 40A and the nominal voltage of the DC bus is DC 700V. This servo drive is version 3 and comes with standard firmware.

DKC02.3-040-7-FW is the 3rd version of the 02 series controller. The DKC02.3-040-7-FW has A rated current of 40 A and a nominal DC bus voltage of 700 V DC. This particular drive uses the SERCOS interface for command communication. The firmware on this drive is factory assigned and the nature is not specified. If necessary, the firmware programming module can be removed and replaced. Programming module includes parameter module and firmware module. The parameter module is for user-specific parameters, while the firmware module is for cell-specific firmware. Unlike some DKC equivalents, this particular drive controller does not have a specific firmware version.

As mentioned earlier, DKC02.3-040-7-FW uses SERCOS or serial real-time communication system interfaces. The SERCOS interface has two fiber connections for connecting to higher level controllers. The drive controller is ideal for machines with multi-axis systems, such as printers. The warranty period is one year.

Rexroth DKC02.3-040-7-FW 交流伺服放大器驱动控制器

【其他型号推荐】