810-801237-021 步进驱动器接口板 

【产品详情】

型号：810-801237-021，由于商品数量众多，仅上传了部分商品。如果您找不到您想要的商品，请咨询卖家，我们将竭诚为您服务。

此过程说明如何替换Tricon模块上的EPROM。

LAM 810-801237-021程序

1 使用OKIC提取器（部件号M125B002）卸下现有的EPROM，或

LAM 810-801237-021 类似的工具。将用过的EPROM存放在导电泡沫容器中，其中新的

一个被运送了。

阿拉伯数字 检查新EPROM上的针脚。拉直弯曲的销钉。如果一侧的所有引脚都位于

与芯片成 90° 角以上，将引脚轻轻按在平坦的表面上，直到它们位于

90°.

3 要插入新的EPROM，请将EPROM上的凹口（或其他识别标记）对齐

LAM 810-801237-021，插座上有槽口。这可确保EPROM的引脚1位于正确的位置

位置。

四 当新的EPROM正确放置在插座上时，将其弹出到锁定位置。

5 验证所有针脚是否已安装到插座中。

810-801237-021 步进驱动器接口板 

【英文介绍】

Model: 810-801237-021, due to the large number of products, only some products have been uploaded. If you can't find the item you are looking for, please consult the seller and we will be happy to serve you.

This procedure explains how to replace the EPROM on the Tricon module.

LAM 810-801237-021 procedure

1 Remove the existing EPROM using the OKIC extractor (Part number M125B002), or

LAM 810-801237-021 Similar tools. Store the used EPROM in a conductive foam container where the new one is

One was shipped.

Arabic numerals check the pins on the new EPROM. Straighten the bent pin. If all the pins on one side are located

At an Angle of more than 90° from the chip, press the pins gently on a flat surface until they are located

90 °.

3 To insert a new EPROM, align the notch (or other identifying mark) on the EPROM

LAM 810-801237-021, socket with notch. This ensures that pin 1 of the EPROM is in the correct position

Location.

When the new EPROM is properly placed on the socket, eject it into the lock position.

5 Verify that all pins are installed in the socket.

810-801237-021 步进驱动器接口板 

【其他型号推荐】