☆型号：TAS-311DG 可选传感器 可测量正弦交流电压
【产品详情】
DEIF传感器系列中的TAS单元功能强大、快速、紧凑，可测量正弦交流电压和/或电流信号，并提供与PLC、PC、微处理器控制、指示器、报警单元等测量成比例的直流或电压信号的输出信号。
TAS 传感器基于微控制器，具有一个模拟输出，用于测量交流网络上的电压、电流、频率和相位角。由于这些传感器没有电位计等机械部件，因此校准稳定性非常好。
TAS传感器可以预先配置以设置测量值和范围，也可以使用DEIF的免费PC工具进行未配置以供客户配置。
变种
TAS-311DG型
工厂配置的传感器，用于电压、电流、频率或相位角测量。
辅助电源：57 至 690 V AC。
辅助电源：24 至 220 V DC。
TAS-321DG型
工厂配置的传感器，用于双向电流测量。
辅助电源：57 至 690 V AC。
辅助电源：24 至 220 V DC。
TAS-331DG型
工厂配置的传感器，用于功率或无功功率测量。
辅助电源：57 至 690 V AC。
辅助电源：24 至 220 V DC。
☆型号：TAS-311DG 可选传感器 可测量正弦交流电压
【英文介绍】
The TAS units in the DEIF sensor family are powerful, fast, and compact, measuring sinusoidal AC voltage and/or current signals and providing output signals for DC or voltage signals proportional to measurements of PLCS, PCS, microprocessor controls, indicators, alarm units, and more.
The TAS sensor is based on a microcontroller and has an analog output that measures voltage, current, frequency, and phase Angle on an AC network. Since these sensors have no mechanical parts such as potentiometers, calibration stability is very good.
TAS sensors can be pre-configured to set measurement values and ranges, or unconfigured for customer configuration using DEIF's free PC tools.
variety
TAS-311DG
Factory-configured sensors for voltage, current, frequency or phase Angle measurement.
Auxiliary power supply: 57 to 690 V AC.
Auxiliary power supply: 24 to 220 V DC.
TAS-321DG
Factory-configured sensors for bi-directional current measurement.
Auxiliary power supply: 57 to 690 V AC.
Auxiliary power supply: 24 to 220 V DC.
TAS-331DG
Factory-configured sensors for power or reactive power measurement.
Auxiliary power supply: 57 to 690 V AC.
Auxiliary power supply: 24 to 220 V DC.
☆型号：TAS-311DG 可选传感器 可测量正弦交流电压
【其他型号推荐】
