MVR1600-4601A 风冷整流器模块 可以处理高输入和输出电流

>>>>>型号:MVR1600-4601A  风冷整流器模块   可以处理高输入和输出电流 

【功能描述】

MVR1600-4601-A 是由 Avid Controls Inc. 制造的风冷整流器模块。它旨在将交流电源转换为低压直流电源，用于各种工业应用。以下是其功能和关键点的细分：

功能：

MVR1600-4601-A 可整流输入交流线路电压（可能在 480VAC 或 600VAC 范围内，具体取决于型号）并将其转换为稳压直流电压（通常约为 500VDC）。

然后，该直流电压可用于为工业环境中的电子设备和控制系统供电。

主要特点：

交流到直流转换：高效地将交流主电源转换为稳压直流电压。

风冷设计：利用空气循环进行散热，无需水冷系统。

高额定功率：可以处理高输入和输出电流，适用于要求苛刻的应用供电。（Avid Controls 没有在其数据表上指定确切的额定值，但提到它可以处理高电流负载）。

防护等级：外壳可能提供防护等级 （IP），表明其对灰尘、湿气和其他环境污染物的防护等级。有关具体的 IP 等级，请参阅数据表。

应用：

MVR1600-4601-A 用于需要大功率直流电源的各种工业应用，例如：

工业自动化系统：为工业自动化设置中的控制系统、驱动器和其他电子设备供电。

制造工艺：为电机、焊接设备和其他工业机械提供直流电源。

可再生能源系统：可能与太阳能电池板或风力涡轮机结合使用，将产生的交流电转换为直流电，用于电池存储或电网注入。

MVR1600-4601-A was developed by Avid Controls Inc. Manufactured air-cooled rectifier module. It is designed to convert AC power to low-voltage DC power for a variety of industrial applications. Here's a breakdown of its features and key points:

Features:

The MVR1600-4601-A rectifiers the input AC line voltage (possibly in the range of 480VAC or 600VAC, depending on the model) and converts it to a regulated DC voltage (typically about 500VDC).

This DC voltage can then be used to power electronic devices and control systems in industrial environments.

Main features:

Ac to DC conversion: Efficient conversion of AC main power supply to regulated DC voltage.

Air cooling design: The use of air circulation for heat dissipation, no water cooling system.

High power rating: Can handle high input and output currents for demanding power supply applications. (Avid Controls doesn't specify an exact rating on its datasheet, but mentions that it can handle high-current loads).

Protection Rating: The enclosure may provide a protection rating (IP) indicating its level of protection against dust, moisture, and other environmental contaminants. Refer to the data sheet for specific IP levels.

Applications:

The MVR1600-4601-A is used in a variety of industrial applications that require high-power DC power sources, such as:

Industrial Automation systems: Power control systems, drives and other electronic devices in industrial automation Settings.

Manufacturing process: DC power supply for motors, welding equipment and other industrial machinery.

Renewable energy systems: May be used in combination with solar panels or wind turbines to convert the alternating current generated into direct current for battery storage or grid injection.

 The MVR1600-4601-A is a thyristor/diode-based rectifier bridge module manufactured by Avid Controls under license from General Electric Company. It has a rated voltage of 690 Vac and 1600 Adc (nominal) and is air-cooled. In addition, the module has a pre-charged protection circuit, but does not contain user-serviceable components.

【其他型号推荐】