GPIB-USB-B GPIB 控制器 具有三种变体的控制器

【产品详情】

National Instruments GPIB-USB-B GPIB 控制器

GPIB-USB-B是一款GPIB控制器，用于GPIB设备和带有USB端口的个人计算机之间的有效通信。NI创建了具有三种变体的控制器。NI GPIB-USB-B 的指定部件号为 778416-01，适用于专为 Windows 2000/XP 操作系统设计的版本。Windows Me/98 的部件号为 779192-01。对于Linux操作系统，该控制器的最后一个部件号为779354-01.GPIB-USB-B

能够执行IEEE-488标准的全部功能，最多可以控制14个GPIB设备。该控制器可实现 USB 2.0 全速信号传输。NI GPIB-USB-B 随附 一根 2 米 长 的 USB 电缆。National Instruments GPIB-USB-B 的安装非常简单，因为它不需要外部 DIP 开关。要重新组织 IEEE-488.2，用户无需在 PC 上安装控制器后重新启动计算机。用户可以从颜色中识别GPIB-USB-B。该控制器是蓝色的，而GPIB-USB-A是黑色的，这是两个控制器之间为数不多的区别之一。该器件的传输速率为每秒 850 KB，全速 USB 信号为 12 Mb/s，最大功耗值为 200 mA。

NI GPIB-USB-B 不像 其他 GPIB 接口 那样 需要 外部 电源。GPIB-USB-B 控制器提供 850 KB/s 的数据传输速率。该控制器使用NIDAQmx驱动程序软件运行，该软件与LabVIEW、LabWindows/CVI和Measurement Studio等标准NI软件应用程序兼容。

National Instruments GPIB-USB-B控制器重量轻、体积小，是需要GPIB仪器和个人计算机之间通信的便携式应用的合适选择。GPIB-USB-B配有用于USB配置和USB活动选项的LED指示灯。该控制器配有 USB 标准系列 A 插头 I/O 连接器。

NI 设备 的 尺寸 为 4.2 x 2.6 x 1.0 英寸。在物理维度上。建议的工作和存储温度范围为 0 至 55 °C 和 -20 至 70 °C，非冷凝工作和存储湿度范围分别为 10% 至 90% RH 和 5 至 95% RH。

相关部件号：188417-01、188417D-01、188417E-01、778416-01、779192-01、779354-01

GPIB-USB-B GPIB 控制器 具有三种变体的控制器

【英文介绍】

National Instruments GPIB-USB-B GPIB controller

Gpib-usb-b is a GPIB controller for efficient communication between GPIB devices and personal computers with USB ports. NI has created controllers with three variants. The NI GPIB-USB-B has the specified part number 778416-01 and is suitable for versions designed for Windows 2000/XP operating systems. The part number of Windows Me/98 is 779192-01. For Linux operating systems, the last part number of this controller is 779354-01.GPIB-USB-B

Capable of performing all functions of the IEEE-488 standard and controlling up to 14 GPIB devices. The controller can realize USB 2.0 full speed signal transmission. The NI GPIB-USB-B comes with a 2-meter USB cable. The installation of the National Instruments GPIB-USB-B is very simple as it does not require an external DIP switch. To reorganize IEEE-488.2, the user does not need to restart the computer after installing the controller on the PC. Users can identify GPIB-USB-B by color. The controller is blue while the GPIB-USB-A is black, which is one of the few differences between the two controllers. The device has a transfer rate of 850 KB per second, a full-speed USB signal of 12 Mb/s, and a maximum power consumption of 200 mA.

NI GPIB-USB-B does not require an external power supply like other GPIB interfaces. The GPIB-USB-B controller provides a data transfer rate of 850 KB/s. The controller runs using NIDAQmx driver software, which is compatible with standard NI software applications such as LabVIEW, LabWindows/CVI and Measurement Studio.

The National Instruments GPIB-USB-B controller is lightweight and small, making it the right choice for portable applications that require communication between GPIB instruments and personal computers. GPIB-USB-B comes with LED indicators for USB configuration and USB activity options. The controller comes with A USB Standard Series A plug I/O connector.

NI devices measure 4.2 x 2.6 x 1.0 inches. In the physical dimension. The recommended operating and storage temperature ranges are 0 to 55 °C and -20 to 70 °C, and the non-condensing operating and storage humidity ranges are 10 to 90% RH and 5 to 95% RH, respectively.

Related part numbers: 188417-01, 188417D-01, 188417E-01, 778416-01, 779192-01, 779354-01

GPIB-USB-B GPIB 控制器 具有三种变体的控制器

【其他型号推荐】