GPIB-PCII1   IEEE 488，GPIB接口 适用于带ISA插槽的PC

【产品详情】

特征：

NAT4882 ASIC

半尺寸板适合任何 ISA 插槽

软件与过去的GPIB-PCII和GPIB-PCIIA板卡兼容

可选择 3 个 DMA 通道和 6 个中断线

超过 300 KB/s 的传输速率

射频屏蔽 IEEE 488 连接器

National Instruments GPIB-PCII GPIB 接口

GPIB-PCII（部件号：777463-01、777463-51、776092-01和776092-51）是一款低成本、功能齐全的GPIB接口，适用于带ISA插槽的PC。 GPIB-PCII接口的制造商是National Instruments。GPIB-PCII 与许多电路板兼容，例如任何基于 TI TMS 9914A 控制器芯片的接口电路板以及所有基于 NEC μPD7210 的 GPIB-PCII 和 GPIB-PCIIA 电路板。GPIB-PCII可以将简单的PC、PC/XT、IBM、PCAT或任何其他兼容的个人计算机转换为先进的、功能齐全且可操作的IEEE 488.2控制器、讲话者和侦听器。这种转换可以通过使用配备NAT4882芯片的GPIB-PCII来完成。

GPIB的标准电缆可用于将多达14台仪器与NI GPIB-PCII连接。NI的总线扩展器或扩展器也可用于将超过14台仪器与GPIB-PCII连接。可通过 DIP 开关选择此 GPIB 接口和 I/O 基址上的 TI TMS9914A 或 NEC μPD7210 操作模式。

用于NI GPIB-PCII的驱动程序软件是NI-488.2。 NI-488.2 具有 多个 库 的 内 置 功能， 如 语言 界面 库 和 动态 链接 库。还有几个实用程序，包括开发和调试实用程序。GPIB-PCII驱动软件和硬件将一个简单的系统转变为具有完整总线管理和通信能力的多功能系统。可以订购一些与GPIB-PCII兼容的其他软件，如measurement Studio、LabVIEW和LabWindows/CVI，以便与GPIB仪器进行通信。

GPIB-PCII1   IEEE 488，GPIB接口 适用于带ISA插槽的PC

【英文介绍】

Features:

NAT4882 ASIC

Half size board fits into any ISA slot

The software is compatible with past GPIB-PCII and GPIB-PCIIA boards

3 DMA channels and 6 interrupt lines are available

Over 300 KB/s transfer rate

Rf shielding IEEE 488 connector

National Instruments GPIB-PCII GPIB interface

The GPIB-PCII (Part number: 777463-01, 777463-51, 776092-01, and 776092-51) is a low-cost, full-featured GPIB interface for PCS with ISA slots. The manufacturer of the GPIB-PCII interface is National Instruments. GPIB-PCII is compatible with many boards, such as any interface board based on the TI TMS 9914A controller chip and all GPIB-PCII and GPIB-PCIIA boards based on the NEC μPD7210. GPIB-PCII can convert a simple PC, PC/XT, IBM, PCAT, or any other compatible personal computer into an advanced, fully functional, and operational IEEE 488.2 controller, speaker, and listener. This conversion can be done by using a GPIB-PCII equipped with a NAT4882 chip.

GPIB's standard cable can be used to connect up to 14 instruments to NI GPIB-PCII. NI's bus extender or extender can also be used to connect more than 14 instruments to GPIB-PCII. The TI TMS9914A or NEC μPD7210 operating mode on this GPIB interface and I/O base can be selected with a DIP switch.

The driver software for NI GPIB-PCII is NI-488.2. NI-488.2 has built-in functionality for several libraries, such as the language interface library and the dynamic link library. There are also several utilities, including development and debugging utilities. GPIB-PCII driver software and hardware transform a simple system into a versatile system with complete bus management and communication capabilities. Some additional software compatible with GPIB-PCII, such as measurement Studio, LabVIEW and LabWindows/CVI, can be ordered to communicate with GPIB instruments.

GPIB-PCII1   IEEE 488，GPIB接口 适用于带ISA插槽的PC

【其他型号推荐】