PXIe-8105 PXI 控制器 提供了一个操作系统恢复CD

【产品详情】

National Instruments PXIe-8105 PXI 控制器

PXIe-8105（部件号：779710-00、779710-01、779711-00和779711-01）PXI控制器包含两种策略，用于重建硬盘的原始出厂状态。 基于硬盘驱动器的恢复将出厂备份存储在硬盘驱动器的单独段上，使用户能够在没有额外介质的情况下重新建立控制器。NI PXIe-8105 控制器 还 提供 了 一个 操作系统 恢复 CD， 使 用户 能够 通过 外部 的 USB CD/ DVD-ROM 在 硬盘 上 重新安装 工作 框架。

对于处理两个线程的应用程序，CPU 将两个未使用的内核置于空闲状态，并将动态内核的时钟频率从 12.3 GHz 扩展到 3.2 GHz。对于使用四个线程的应用程序，CPU 从 2.3 GHz 增加到 3.1 GHz，Turbo Boost 为各种利用率提供了执行增量，对于处理器密集型应用程序，可以从根本上减少 11 倍。

因此，PXIe-8105将感知ExpressCard并加载正确的驱动程序。第三方卡可能要求用户引入额外的驱动程序。NI PXIe-8105 控制器 预 装 了 一个 操作 系统。有时，用户可能需要引入备用操作系统。

此模型带有负载设置默认值。此设置将所有 BIOS 设置重新建立为出厂默认设置。如果控制器由于偏离底座或错误的 BIOS 设置而显示不稳定的行为，这将很有价值。请注意，任何非默认设置（如启动请求、密码和无键盘任务）都将重新建立为其生产线默认值。这可能会带来不良行为，并且在高度定制的情况下，可能会使控制器出现故障或无法启动。

PXIe-8105 PXI 控制器 提供了一个操作系统恢复CD

【英文介绍】

National Instruments PXIe-8105 PXI controller

The PXY-8105 (Part number: 779710-00, 779710-01, 779711-00, and 779711-01) PXI controller contains two policies to reconstruct the original factory state of the hard drive. Hard drive based recovery stores factory backups on a separate segment of the hard drive, enabling users to re-establish the controller without additional media. The NI PXIe-8105 controller also comes with an operating system recovery CD that enables users to reinstall the working frame on the hard drive via an external USB CD/ DVD-ROM.

For applications dealing with two threads, the CPU leaves the two unused cores idle and extends the clock rate of the dynamic kernel from 12.3 GHz to 3.2 GHz. For applications that use four threads, the CPU increases from 2.3GHz to 3.1GHz, and Turbo Boost provides execution increments for various utilization, which can be radically reduced by up to 11x for processor-intensive applications.

As a result, the PXIe-8105 will sense ExpressCard and load the correct driver. Third-party cards may require the user to introduce additional drivers. The NI PXIe-8105 controller comes pre-installed with an operating system. Sometimes, users may need to bring in an alternate operating system.

This model comes with load setting defaults. This setting re-establishes all BIOS Settings to factory defaults. This can be valuable if the controller shows erratic behavior due to off-base or faulty BIOS Settings. Note that any non-default Settings, such as startup requests, passwords, and keyboardless tasks, are re-established as their line defaults. This can introduce bad behavior and, in highly customized cases, can cause the controller to fail or fail to start.

PXIe-8105 PXI 控制器 提供了一个操作系统恢复CD

【其他型号推荐】