SCXI-1600 数据采集模块 用于SCXI数字I/O

【产品详情】

National Instruments SCXI-1600 数据采集模块

NI SCXI-1600（部件号：776572-1600）具有16位ADC，是用于SCXI的USB数据采集模块（DAQ）。该模块是用于SCXI数字I/O、开关、模拟量输入和模拟量输出模块的全功能控制和数据模块。它的采样率为 200 kS/s。用户可以将SCXI-1600安装在仪器仪表信号调理扩展（SCXI）机箱中，并为机箱中安装的所有其他模块提供时钟、校准和外部数字触发连接。通过该模块，用户可以将任何SCXI机箱转换为坚固可靠的即插即用数据采集系统。

NI SCXI 1600 可 接收 来自 其他 模 块 的 模拟 信号， 并 通过 USB 端口 对 数据 进行 数字化、 放大 和 传输。它是最容易配置和校准的设备之一，因为它没有跳线、电位计或 DIP 开关。通过将其连接到其他SCXI模块，该模块可以从RTD、热电偶、应变计、电流源和电压中采集多达352个模拟信号。

NI SCXI 1600 兼容 USB， 支持 有源 或 热 插入 USB 端口。对于与时间相关的功能，该数据采集模块采用强大的系统时序控制器，称为National Instruments DAQ-STC。

为了控制模拟输入，DAQ-STC由三个定时组组成。该模块在前面板上配备了四个 LED。有一组绿色 LED 用于监控机箱的 V+ 和 V– 导轨。另外两个LED显示SCXI-1600数据采集模块的活动和就绪状态。为了进行校准，该模块的前面板上还提供了一个专用的 BNC 连接器。

NI 设备 使用 NIDAQmx 驱动 软件 运行 ， 该 软件 与 LabVIEW、LabWIndows/CVI 或 Measurement Studio 等 软件包 / 应用 开发 环境 兼容。它的建议预热时间为 30 分钟，应每年至少进行一次外部校准。NI 设备 的 尺寸 为 7.2 x 6.8 x 1.2 英寸。在物理维度上。

SCXI-1600 数据采集模块 用于SCXI数字I/O

【英文介绍】

National Instruments SCXI-1600 Data acquisition module

The NI SCXI-1600 (Part number: 776572-1600) has a 16-bit ADC and is a USB Data acquisition module (DAQ) for SCXI. The module is a full-featured control and data module for SCXI digital I/O, switching, analog input and analog output modules. Its sample rate is 200 kS/s. Users can install the SCXI-1600 in an Instrumentation Signal Conditioning Extension (SCXI) case and provide clock, calibration, and external digital trigger connections for all other modules installed in the case. With this module, users can convert any SCXI chassis into a robust and reliable plug and play data acquisition system.

The NI SCXI 1600 receives analog signals from other modules and digitizes, amplifies, and transmits data via a USB port. It is one of the easiest devices to configure and calibrate because it has no jumpers, potentiometers, or DIP switches. By connecting it to other SCXI modules, the module can collect up to 352 analog signals from RTDS, thermocouples, strain gauges, current sources, and voltages.

The NI SCXI 1600 is USB compatible and supports active or hot-plug USB ports. For time-related functions, the data acquisition module uses a powerful system timing controller called National Instruments DAQ-STC.

To control the analog input, the DAQ-STC consists of three timing groups. The module is equipped with four leds on the front panel. There is a set of green leds for monitoring the V+ and V - rails of the chassis. The other two leds display the active and ready status of the SCXI-1600 data acquisition module. For calibration, a dedicated BNC connector is also provided on the front panel of the module.

NI devices run with NIDAQmx driver software that is compatible with package/application development environments such as LabVIEW, LabWIndows/CVI or Measurement Studio. It has a recommended warm-up time of 30 minutes and should be externally calibrated at least once a year. NI devices measure 7.2 x 6.8 x 1.2 inches. In the physical dimension.

SCXI-1600 数据采集模块 用于SCXI数字I/O

【其他型号推荐】