SCXI-1374 机箱手柄套件兼容SCXI-1382、PXI-1010和SCXI机箱

【产品详情】

National Instruments SCXI-1374 机箱手柄套件

National Instruments SCXI-1374（部件号：776577-74）是专为SCXI机箱设计的机箱手柄套件。此手柄套件设计用于安装在机箱的任一侧。为了 更 便于 操作， 您 还 可以在 PXI 机 箱 的 每 侧 安装 一个 手柄 套件。该组件采用优质材料设计，具有底盘所需的强度。SCXI-1374手柄套件包括：一个手柄板组件、两个8-32螺钉、一个6-32螺钉和四个橡胶支脚。此手柄套件的安装指南配有高质量的插图和详细说明。因此，您可以在没有任何专业帮助的情况下轻松安装此机箱手柄套件。

该机箱手柄套件与PXI-1010、SCXI-1000DC、SCXI-1000、SCXI-2000和SCXI-1001机箱兼容。NI SCXI-1374 套件 还 兼容 SCXI-1382 电池 组。如果您仅在外壳的一端安装手柄套件，则可以使用此套件提供的四个橡胶支脚。使用此手柄套件，您可以轻松地抬起机箱并更方便地重新定位它。SCXI-1374手柄套件是那些需要定期移动设备的人的理想解决方案。

在机箱两侧安装手柄套件可以使整个搬迁工作更加轻松。因此，您可以将此套件与机箱结合使用，而不必担心损坏它。该附件配有所需数量的适当螺钉。提供的橡胶支脚还用作后端板和任何其他金属表面之间的绝缘体。

SCXI-1374 机箱手柄套件兼容SCXI-1382、PXI-1010和SCXI机箱

【英文介绍】

National Instruments SCXI-1374 Case handle kit

The National Instruments SCXI-1374 (Part number: 776577-74) is a case handle kit specifically designed for SCXI cases. This handle kit is designed to be mounted on either side of the case. For ease of operation, you can also install a handle kit on each side of the PXI chassis. The assembly is designed with high-quality materials and has the strength required by the chassis. The SCXI-1374 handle kit consists of one handle plate assembly, two 8-32 screws, one 6-32 screws, and four rubber legs. The installation guide for this handle kit comes with high quality illustrations and detailed instructions. As a result, you can easily install this case handle kit without any professional help.

The chassis handle kit is compatible with the PXI-1010, SCXI-1000DC, SCXI-1000, SCXI-2000, and SCXI-1001 chassis. The NI SCXI-1374 kit is also compatible with the SCXI-1382 battery pack. If you install a handle kit on only one end of the housing, you can use the four rubber legs provided with this kit. With this handle kit, you can easily lift the case and reposition it more easily. The SCXI-1374 gamepad kit is the ideal solution for those who need a mobile device on a regular basis.

Mounting a handle kit on both sides of the case can make the entire relocation job much easier. Therefore, you can use this kit in combination with the case without worrying about damaging it. The attachment is equipped with the appropriate number of screws required. The rubber legs provided are also used as an insulator between the rear end plate and any other metal surface.

SCXI-1374 机箱手柄套件兼容SCXI-1382、PXI-1010和SCXI机箱

【其他型号推荐】