SCXI-1313A 18 螺丝端子 接线端子

【产品详情】

National Instruments SCXI-1313A 接线端子

SCXI-1313A（部件号：777687-13A）可与SCXI-1125模块一起使用。该屏蔽接线端子有 18 个螺丝端子，可确保与模块的简单信号连接。使用SCXI 1313A所需的物品包括：接线端子、SCXI-1125模块、SCXI或PXI/SCXI组合机箱、必要的电缆和传感器（基于用户的应用）、电线绝缘剥线器、剪线钳、长嘴钳、1号和2号飞利浦螺丝刀，以及1/8英寸。一字螺丝刀。用户还需要每个所用设备的文档/手册，以保证正确和安全地安装接线端子。

用户应记住，SCXI-1313是Measurement & Automation Explorer和NI-DAQ软件中SCXI-1313和SCXI-1313A的代号。接线端子上的校准 EEPROM 可保存校准常数，从而提供软件校正值。然后，应用开发软件利用这些值来调整衰减电路内增益误差的测量值。用户可以使用大量样本的平均值来获得最精确的读数。嘈杂的条件需要大量的样品才能获得更高的精度。

National Instruments SCXI 1313A 接线端子是 CAT II 测量类别的仪器，输入范围为 150 Vrms 或 VDC。该型号具有 8 个输入通道、一个热敏电阻冷端传感器、0 至 50 °C 的 1.91 至 0.65 V 输出以及接线端子入口处的应力消除条。

SCXI-1313A 18 螺丝端子 接线端子

【英文介绍】

National Instruments SCXI-1313A terminal

The SCXI-1313A (Part number: 777687-13A) can be used with the SCXI-1125 module. The shielded terminal has 18 screw terminals to ensure a simple signal connection to the module. Items required to use the SCXI 1313A include: terminal terminals, SCXI-1125 module, SCXI or PXI/SCXI combination chassis, necessary cables and sensors (based on user's application), wire insulation strippers, wire cutters, long nose pliers, No. 1 and No. 2 Philips screwdrivers, and 1/8 inch. A flat-head screwdriver. The user also needs documentation/manuals for each device used to ensure proper and safe installation of terminals.

Users should remember that SCXI-1313 is the codename for SCXI-1313 and SCXI-1313A in Measurement & Automation Explorer and NI-DAQ software. The calibration EEPROM on the terminal holds the calibration constant to provide a software correction. Development software is then applied to adjust the measured value of the gain error in the attenuating circuit using these values. Users can use the average of a large number of samples to get the most accurate reading. Noisy conditions require a large number of samples to achieve higher accuracy.

The National Instruments SCXI 1313A terminal is a CAT II measurement category instrument with an input range of 150 Vrms or VDC. This model has eight input channels, a thermistor cold end sensor, 1.91 to 0.65 V outputs from 0 to 50 °C, and a stress relief bar at the terminal entrance.

SCXI-1313A 18 螺丝端子 接线端子

【其他型号推荐】