SCXI-1163R 继电器开关模块 光隔离固态继电器

【产品详情】

National Instruments SCXI-1163R 继电器开关模块

NI SCXI-1163R（部件号：776572-63R）继电器开关模块具有32个A型（常开）光隔离固态继电器。继电器分为八组，每组四组，每组一个公共极点。该继电器开关模块可用于将高压负载切换到 240 VAC/VDC 和最大 200 mA。 SCXI 1163R模块可用于多种类型的工业和实验室应用。固态继电器通道可用于切换各种交流和直流电压和功率信号，以控制现场仪表。可与该模块一起使用的附件包括SCXI-1326接线端子、PXI-4021开关控制器和PCI-4021开关控制器。此外，还有多个适配器、电缆和电缆组件可用于此模块。该器件配有一个 48 针 DIN C 公头 I/O 连接器。

对SCXI-1163R进行编程时，有四种类型的软件可供选择：LabVIEW、LabWindows、NI-DAQ和寄存器级编程软件。如果用户选择使用LabVIEW或LabWindows软件，这将大大减少用户数据采集和控制应用程序的开发时间。如果用户决定编写寄存器级软件，建议他们使用NI不支持的编程语言或操作系统，或者他们必须是经验丰富的寄存器级程序员。该继电器开关模块已通过 CE 和 UL 认证。

由于NI SCXI-1163R继电器开关模块上的继电器是固态继电器，因此它们没有任何活动部件。因此，这些继电器不像机电继电器那样具有有限的寿命。为避免损坏继电器，请勿尝试切换超过 240 V 或 200 mA 的负载。该器件的最大开关电流为 200mA，最大工作电压为 450V，最大漏电流为 1μA。该设备重 625 克，尺寸为 6.8 x 8.0 x 1.2 英寸。在物理维度上。

SCXI-1163R 继电器开关模块 光隔离固态继电器

【英文介绍】

National Instruments SCXI-1163R Relay switch module

The NI SCXI-1163R (Part number: 776572-63R) relay switching module features 32 Type A (normally open) optically isolated solid-state relays. The relays are divided into eight groups of four, each with a common pole. The relay switch module can be used to switch high voltage loads to 240 VAC/VDC and up to 200 mA. The SCXI 1163R module can be used in many types of industrial and laboratory applications. Solid-state relay channels can be used to switch various AC and DC voltage and power signals to control field instruments. Accessories that can be used with this module include SCXI-1326 terminal blocks, PXI-4021 switching controllers, and PCI-4021 switching controllers. In addition, there are multiple adapters, cables, and cable assemblies available for this module. The device is equipped with a 48-pin DIN C male I/O connector.

When programming SCXI-1163R, there are four types of software to choose from: LabVIEW, LabWindows, NI-DAQ, and register-level programming software. If the user chooses to use LabVIEW or LabWindows software, this will greatly reduce the development time of the user data acquisition and control application. If users decide to write register-level software, they are advised to use a programming language or operating system not supported by NI, or they must be experienced register-level programmers. The relay switch module is CE and UL certified.

Because the relays on the NI SCXI-1163R relay switch module are solid-state relays, they do not have any moving parts. As a result, these relays do not have a limited life span like electromechanical relays. To avoid damaging the relay, do not attempt to switch loads greater than 240 V or 200 mA. The device has a maximum switching current of 200mA, a maximum operating voltage of 450V, and a maximum leakage current of 1μA. The device weighs 625 grams and measures 6.8 x 8.0 x 1.2 inches. In the physical dimension.

SCXI-1163R 继电器开关模块 光隔离固态继电器

【其他型号推荐】