SCXI-1161 8通道通用开关模块 具有独立的单刀双掷闭锁继电器

【产品详情】

National Instruments SCXI-1161 通用开关模块

SCXI-1161 （部件号： 776572-61） 是一款8通道通用开关模块， 具有独立的单刀双掷（SPDT） （C型） 闭锁继电器。这些继电器非常适合切换、路由和控制中电平信号。由于该开关模块的继电器在125 Vrms时可以以最大8 A、在250 Vrms时以6 A或在30 VDC时以5 A的电流切换，因此SCXI 1161非常适合更高功率的应用。每个通道都有一个常闭 （NC）、常开 （NO） 和公共 （COM） 端子。一个或多个机箱中可以利用两个或多个NI SCXI-1161模块来切换和控制数千个信号。该模块的最大开关速率为每秒 3 次操作，并且完全可通过软件编程。

当SCXI-1161交换机模块与SCXI机箱一起使用时，SCXI机箱可以在工业过程监控、实验室测试和生产测试等应用中用作控制器或切换器。NI SCXI-1161 可 与 NI MIO 板 板 充分 配合 使用 ;Lab-NB、Lab-PC、Lab-PC+、Lab-LC 和 PC-LPM-16/PnP 板;以及 DIO-24、DIO-32F 和 DIO-96 板。SCXI-1161模块还配有多个可选附件。这些附件包括：单插槽电缆延长器、多机箱适配器以及电缆和电缆组件。SCXI-1161使用NI-SWITCH驱动程序软件运行。

SCXI 1161 模 块 上 的 反向 信号 连接器 是 50 针 公 头 带状 电缆 接头。反向信号连接器的配套连接器是带应力消除装置的 50 位极化带状插座连接器。此外，该模块还配备了一个 16 x 2 minicombicon 接头和 24 个螺丝端子 I/O 连接器。NI

设备 重 12 盎司， 尺寸 为 6.8 x 8.0 x 1.2 英寸。在物理维度上。它的推荐工作温度范围为 0 °C 至 50 °C，存储温度范围为 –20 °C 至 70 °C，非冷凝相对湿度范围为 5% 至 85%。

SCXI-1161 8通道通用开关模块 具有独立的单刀双掷闭锁继电器

【英文介绍】

National Instruments SCXI-1161 Universal switch module

The SCXI-1161 (Part number: 776572-61) is an 8-channel universal switching module with an independent single-pole double-throw (SPDT) (Type C) latching relay. These relays are ideal for switching, routing, and controlling mid-level signals. Since the relays of this switching module can be switched at A current of up to 8 A at 125 Vrms, 6 A at 250 Vrms, or 5 A at 30 VDC, the SCXI 1161 is well suited for higher power applications. Each channel has a normally closed (NC), normally open (NO), and common (COM) terminal. Two or more NI SCXI-1161 modules can be utilized in one or more chassis to switch and control thousands of signals. The module has a maximum switching rate of 3 operations per second and is fully programmable by software.

When the SCXI-1161 switch module is used with the SCXI chassis, the SCXI chassis can be used as a controller or switcher in applications such as industrial process monitoring, laboratory testing, and production testing. The NI SCXI-1161 can be fully used with the NI MIO board; Lab-NB, Lab-PC, Lab-PC+, Lab-LC and PC-LPM-16/PnP boards; And DIO-24, DIO-32F, and DIO-96 boards. The SCXI-1161 module also comes with a number of optional accessories. These accessories include: single-slot cable extenders, multi-case adapters, and cables and cable assemblies. SCXI-1161 is run using the NI-SWITCH driver software.

The reverse signal connector on the SCXI 1161 module is a 50-pin male ribbon cable connector. The matching connector for the reverse signal connector is a 50-bit polarized strip socket connector with a stress relief device. In addition, the module is equipped with a 16 x 2 minicombicon connector and 24 screw terminal I/O connectors. NI

The device weighs 12 ounces and measures 6.8 x 8.0 x 1.2 inches. In the physical dimension. It has a recommended operating temperature range of 0 °C to 50 °C, a storage temperature range of -20 °C to 70 °C, and a non-condensing relative humidity range of 5% to 85%.

SCXI-1161 8通道通用开关模块 具有独立的单刀双掷闭锁继电器

【其他型号推荐】