NI PXIE-8840QC 嵌入式​控制器​

NI PXIE-8840QC 嵌入式控制器

NI PXIE-8840QC 嵌入式控制器

PXIE-88400C控制和保护单元易于操作和配置，是基于PLC的电源管理系统的理想控制器。除了发电机保护和同步外，PXIE-8840QC还具有负载共享、固定功率、固定频率等调节模式。串行通信可轻松与PLC、SCADA系统等连接，并且该单元具有所有必要的三相测量电路，在优质LCD 屏幕上显示所有值和警报。

将PXIE-88400C变成具有启动/停止和保护功能的发动机控制单元，可选的发动机接口卡还具有单独的电源和独立的微处理器。在PPU-3处理器出现故障的情况下，引擎接口卡将进入备份模式，确保引擎监控不中断。在停机警报的情况下，发动机会自动停机，使其成为控制和监督船用发电机组的可靠解决方案。

PXle，27GHz双核或26GHz四核处理器PXI控制器-PXIE-88400C是一款用于PXI系统的嵌入式控制器，适用于处理器密集型、模块化仪器和数据采集应用。PXIE-88400C包含两个10/100/1000BASE-TX(千兆位)以太网端口、两个USB30端口和四个USB20端口以及一个集成硬盘驱动器串行端口和其他外设I/0。

NI PXIE-8840QC 嵌入式控制器

The PXIE-88400C control and protection unit is easy to operate and configure, making it the ideal controller for PLC-based power management systems. In addition to generator protection and synchronization, the PXIE-8840QC also has load sharing, fixed power, fixed frequency and other adjustment modes. Serial communication is easy to connect with PLC, SCADA systems, etc., and the unit has all the necessary three-phase measurement circuits to display all values and alarms on a quality LCD screen.

Turn the PXIE-88400C into an engine control unit with start/stop and protection functions, the optional engine interface card also has a separate power supply and separate microprocessor. When the PPU-3 processor is faulty, the engine interface card enters the backup mode to ensure uninterrupted engine monitoring. In the event of a shutdown alarm, the engine automatically shuts down, making it a reliable solution for controlling and supervising Marine generator sets.

PXle, 27GHz dual-core or 26GHz quad-core processor PXI Controller - The PXIE-88400C is an embedded controller for PXI systems for processor-intensive, modular instrumentation and data acquisition applications. The PXIE-88400C includes two 10/100/1000BASE-TX(Gigabit) Ethernet ports, two USB30 ports and four USB20 ports, as well as an integrated hard drive serial port and other peripherals I/0.

NI PXIE-8840QC 嵌入式控制器