MVME-5100 单板计算机 高性能 VME 模块

☆型号：MVME-5100 单板计算机 高性能 VME 模块

【产品详情】

特征：

MPC7410、MPC750或MPC755微处理器，带32KB L1缓存

100 MHz 前端总线

32/64 位 PMC 扩展插槽

17MB闪存

双 10BaseT/100BaseTX 以太网

艾默生/摩托罗拉 MVME-5100 单板计算机是一款高性能 VME 模块，采用摩托罗拉的 PowerPlus II 架构，可选择多种处理器 - 摩托罗拉的 MPC7400 或采用 AltiVec 技术的 MPC7410，或低功耗 MPC750 级或 MPC755 级处理器。该MVME5100集成了高度优化的PCI接口和内存控制器，可实现高达582MB的内存读取带宽和640MB的突发写入带宽。

MVME5100通过其P1和P2与VMEbus系统接口连接器并包含两个IEEE 1386.1 PCI夹层卡(PMC)老虎机。PMC插槽是64位的，支持前端和后端I/O此外，MVME5100可由用户通过板载设置进行配置跳线。两种I/O模式是可能的:PMC模式和单板机模式。这SBC模式有两种变体:IPMC761和IPMC712。这些变体这取决于正在使用哪个IPMC模块。SBC/IPMC761利用IPMC761和MVME761过渡模块提供761风格后方输入输出能力。SBC/IPMC712利用IPMC712和MVME712M过渡模块提供712风格的后端I/O功能。SBC模式通常是向后兼容的，具体取决于IPMC和过渡模块配对使用，具有等效过渡MVME2600/MVME2700产品线上的模块和P2适配卡。这种模式通过配置板上跳线和以下方式实现将IPMC7xx PMC连接到PMC插槽1并配置辅助MVME5100的以太网端口到后换模块。到处这种手动SBC模式描述了两种变型，除非有特别说明差异，在这些情况下，变体被进一步识别为SBC/IPMC761或SBC/IPMC712。

☆型号：MVME-5100 单板计算机 高性能 VME 模块

【英文介绍】

Features:

MPC7410, MPC750, or MPC755 microprocessor with 32KB L1 cache

100 MHz front end bus

32/64-bit PMC expansion slot

17MB flash memory

Dual 10BaseT/100BaseTX Ethernet

The Emerson/MOTOROLA MVME-5100 single-board computer is a high-performance VME module with MOTOROLA's PowerPlus II architecture and a choice of processors - MOTOROLA's MPC7400 or AltiVec's MPC7410. Or low power MPC750 or MPC755 processors. The MVME5100 integrates a highly optimized PCI interface and memory controller to achieve memory read bandwidth of up to 582MB and burst write bandwidth of 640MB.

The MVME5100 interfaces with the VMEbus system through its P1 and P2 connectors and contains two IEEE 1386.1 PCI Sandwich card (PMC) slot machines. The PMC slot is 64-bit and supports both front-end and back-end I/O. In addition, the MVME5100 can be configured with jumpers by the user through onboard Settings. Two I/O modes are possible :PMC mode and single-board mode. There are two variants of this SBC mode :IPMC761 and IPMC712. These variations depend on which IPMC module is being used. The SBC/IPMC761 utilizes the IPMC761 and MVME761 transition modules to provide 761-style rear I/O capability. The SBC/IPMC712 leverages the IPMC712 and MVME712M transition modules to provide 712-style back-end I/O functionality. The SBC mode is generally backward compatible, depending on the IPMC and transition module pairing, with modules and P2 adapter cards on the equivalent transition MVME2600/MVME2700 product line. This mode is implemented by connecting the IPMC7xx PMC to PMC slot 1 and configuring the Ethernet port of the auxiliary MVME5100 to the rear replacement module through the jumpers on the configuration board and the following methods. Everywhere this manual SBC pattern describes two variants, unless the difference is specifically stated, in which case the variant is further identified as SBC/IPMC761 or SBC/IPMC712.

☆型号：MVME-5100 单板计算机 高性能 VME 模块

【其他型号推荐】