KONGSBERG RMP201-8 船舶控制系统

KONGSBERG RMP201-8 船舶控制系统 

KONGSBERG RMP201-8 船舶控制系统 

2014年7月23日关于船用设备(MED)的指令2014/90/EU的应用，由挪威海事局发布为“Forskriftom Skipsutstyr”。本证书由DNV GL AS在挪威政府授权下颁发。

兹证明:

航向控制系统(HCS)

型号为K-Nav自动驾驶仪

发给

产品参数

型号: RMP201-8

重量:约1.2公斤

尺寸:约20厘米x 10厘米x 5厘米工作温度:-40°C至+70°C

电源:10至36V直流电

通信接口: CAN接口,Ethernet接口

KONGSBERG MARITIME ASKongsberg，挪威

符合以下法规/标准的要求:法规(EU) 2018/773，项目编号:地中海/ 4.16。经修订的SOLAS 74，规则V/18和V/19, IMO Res. A.342(IX)， IMO Res. A.694(17)， IMO Res. MSC191(79)， IMO Res. msc .64(67)附件3,IMO Res. msc .302(87)2014年7月23日关于船用设备(MED)的指令2014/90/EU的应用，由挪威海事局发布为“Forskriftom Skipsutstyr”。本证书由DNV GL AS在挪威政府授权下颁发。通过此协议，控制器相互之间、控制器经由网络和其它设备之间可以完成信息和数据的交换与传送，使各种不同的公司和广家的可编程逻辑控制器(PLC)、RTU、SCADA系统、DCS或与兼容ModBus协议的第三方设备之间可以连成工业网络，构建各种复杂的监控系统，并利于系统的维护和打展，这个通讯协议已广泛被国内外各行业作为系统集成的一种通用丁业标准协议.

KONGSBERG RMP201-8是一款高性能的电机控制器，可广泛应用于机器人控制、无人机控制、自主导航系统等领域。它具有高速数据传输、多种通信协议支持、可定制化配置等特点，可满足不同应用领的需求。同时，它还内置了加速度计和院螺仪，支持双路自话应PO算法，可有效提高控制精度和稳定性。

KONGSBERG RMP201-8 船舶控制系统 

Application of Directive 2014/90/EU of 23 July 2014 on Marine Equipment (MED), issued by the Norwegian Maritime Authority as "Forskriftom Skipsutstyr". This certificate is issued by DNV GL AS under the authority of the Norwegian Government.

This is to certify:

Course Control System (HCS)

Model number is K-Nav Autopilot

issue

Product parameter

Model: RMP201-8

Weight: Approx. 1.2 kg

Size: Approx. 20 cm x 10 cm x 5 cm Operating temperature :-40°C to +70°C

Power supply :10 to 36V DC

Communication interface: CAN interface,Ethernet interface

KONGSBERG MARITIME ASKongsberg, Norway

Compliance with the requirements of the following regulations/standards: Regulation (EU) 2018/773, Item No. Mediterranean / 4.16. Revised SOLAS 74, Rules V/18 and V/19, IMO Res.A.342 (IX), IMO Res.A.694 (17), IMO Res.MSC191 (79), IMO Res.msc.64 (67) Annex 3,IMO Res.msc.302 (87) Application of Directive 2014/90/EU of 23 July 2014 on Marine Equipment (MED), issued by the Norwegian Maritime Authority as "Forskriftom Skipsutstyr". This certificate is issued by DNV GL AS under the authority of the Norwegian Government. Through this protocol, controllers can complete the exchange and transmission of information and data between each other, controllers through the network and other devices, so that various companies and wide programmable logic controllers (PLCS), RTU, SCADA systems, DCS or third-party devices compatible with ModBus protocol can be connected to industrial networks. To build a variety of complex monitoring systems, and to facilitate the maintenance and development of the system, this communication protocol has been widely used by various industries at home and abroad as a general industry standard protocol for system integration.

KONGSBERG RMP201-8 is a high-performance motor controller that can be used in a wide range of applications such as robot control, drone control, autonomous navigation systems and more. It has the characteristics of high-speed data transmission, multiple communication protocols support, customizable configuration, etc., which can meet the needs of different applications. At the same time, it also has a built-in accelerometer and a gyroscope, and supports dual self-talk PO algorithm, which can effectively improve the control accuracy and stability.

KONGSBERG RMP201-8 船舶控制系统