R7247C1001 火焰放大器 固态插件

【产品详情】

概述

固态插件对火焰探测器信号做出响应并指示火焰的存在。

特征

与 BC7000 一起使用;R4140型;R4075C，D，E;R4138C，D 火焰防护控制装置和适当的火焰探测器和FSP5075A1，FSP5075A3火焰放大器模块。

产品规格

评论颜色：绿色项目类型产品批准，Underwriters Laboratories Inc.所列：文件编号MP268，指南编号MCCZ2型加拿大标准协会认证认证：文件编号LR1620，指南编号 140-A-2火焰故障响应时间（秒）2 到 4 秒认证，控制安全设备可接受 （CSD-1）认证， 瑞士再保险可以接受Approvals, Factory Mutual批准日期：报告编号 24181.01自检动态自检与主要安全控制一起使用R4140、BC7000、R4075C、D、E、R4138C、D、FSP5075与火焰传感器一起使用天然气、石油、煤炭：

R7247C1001 火焰放大器 固态插件

【英文介绍】

summarize

The solid-state plug-in responds to the flame detector signal and indicates the presence of a flame.

trait

Use with BC7000; Model R4140; R4075C, D, E; R4138C, D flame protection control device and appropriate flame detector and FSP5075A1, FSP5075A3 flame amplifier module.

Product specification

Comment Color: Green Project Type Product Approval, Underwriters Laboratories Inc. Listed: Document No. MP268, Guide No. MCCZ2 Canadian Standards Association Certification Certification: Document No. LR1620, Guideline No. 140-A-2 Flame Failure Response Time (seconds) 2 to 4 seconds Certified, Control Safety Equipment Acceptable (CSD-1) certified, Swiss Re can receive Approvals, Factory Mutual Approval Date: Report No. 24181.01 Self-test Dynamic self-test with primary safety controls R4140, BC7000, R4075C, D, E, R4138C, D, FSP5075 with flame sensors using natural gas, oil, coal:

R7247C1001 火焰放大器 固态插件

【其他型号推荐】