>>>>>型号:TC-ODK161 内配24V稳压电源 24VDC供电
【功能描述】
TC-ODK161霍尼韦尔Honeywell
CP卡件和WD信号为5VDC供电
I/O卡件为24VDC供电
系统内配24V稳压电源
FSC系统为浮空设计，只需安全接地，接地电阻小于5
详情介绍
Honeywell FSC安全控制系统即我们常说的ESD安全系统，它的基本工作原理和常规的PLC相似，能完成逻辑和数学计算有输入输出卡件，对输入信号扫描并按照特定的控制逻辑驱动现场zui终控制元件，也有数字通讯端口，但不同的是ESD安全系统具备故障容错和故障安全的性能，当生产过程的预定条件受到冲击时，自动地将其置于安全状态，这些预定条件包括压力高限、温度高限等工艺参数。
CPU卡（10020/1/2）：CPU卡的存储器有两种类型：RAM存储器系统变量和应用变量由DBM为RAM提供电池生备；不挥发闪存存存储器包括1）系统程序存储器：保持系统程序，完成浮点运算、报警等功能；2）应用程序存储器：保持所有的用户组态的参数和功能。有三个开关位置；垂直向上：（准备）运行、水平：IDLE9由软件控制）、垂直向下；停止（CPU复位，RESET）。
通讯卡10018/E/1：10018/E/1通讯卡用于与Honeywell的PlantScape系统进行通讯。隔离的以太串行接口将
FSC系统连接到PlantScape服务器，10018/E/1有一个接口。该
通讯卡主板（10018/E/1右则）和一个以太串行接口（10018/E/1左则）板组成。主板控制FSC和PlantScape之间的以太接口。它有自己的处理器和存储器，以便为FSC到外部的设备通讯提供*化的支持。
>>>>>型号:TC-ODK161 内配24V稳压电源 24VDC供电
【英文介绍】
TC-ODK161 Honeywell
The CP card and WD signal provide 5VDC power
The I/O card supplies 24VDC power
The system is equipped with 24V power supply
The FSC system is designed for floating and needs to be safely grounded with a ground resistance of less than 5
Detailed introduction
Honeywell FSC safety control system is often referred to as ESD safety system, its basic working principle is similar to conventional PLC, can complete logical and mathematical calculations have input and output card, scan the input signal and drive the final control element in the field according to the specific control logic, and also has a digital communication port. But the difference is that ESD safety system has fault tolerance and fault safety performance, when the predetermined conditions of the production process are impacted, it automatically puts it in a safe state, these predetermined conditions include high pressure limits, high temperature limits and other process parameters.
CPU card (10020/1/2) : The memory of the CPU card has two types: RAM memory system variables and application variables are provided by DBM for RAM battery production; The non-volatile flash memory includes 1) system program memory: maintain the system program, complete the floating point operation, alarm and other functions; 2) Application memory: keep all user configuration parameters and functions. There are three switch positions; Vertical up: (ready) Run, horizontal: IDLE9 is controlled by software), vertical down; Stop (CPU RESET, RESET).
Communication Card 10018/E/ 1:10018 /E/1 Communication card is used to communicate with Honeywell's PlantScape system. Isolated Ethernet serial interface will
The FSC system is connected to the PlantScape server, and 10018/E/1 has an interface. the
Communication card motherboard (10018/E/1 on the right) and an Ethernet serial interface (10018/E/1 on the left) board. The motherboard controls the Ethernet interface between FSC and PlantScape. It has its own processor and memory in order to provide optimal support for FSC to external device communication.
>>>>>型号:TC-ODK161 内配24V稳压电源 24VDC供电
