FBM214B P0927AH 通信输入接口模块 模拟输入通道

【产品详情】

 FBM214B P0927AH 通信输入接口模块

紧凑型FBM214b HART通信输入接口模块包含8个独立隔离的4至20 mA模拟输入通道。它支持任何标准的混合4至20 mA设备和HART设备(信号电气兼容)，以及紧凑型200系列I/O子系统的一部分。紧凑型FBM214b可用作HART通信现场设备主机，支持Foxboro DCS每秒请求和接收两条数字信息从现场设备。

消息传递功能可用于支持HART通用、通用和设备专用命令，但它不能支持突发通信模式。这些命令是使用fox boro DCS HART现场设备专家。有关详细信息，请参见现场设备专家HART设备控制和I/O (PSS 41S-10FDMHRT)。FBM214b为上的现场设备提供独立的隔离电源八个频道中的每一个。可选地，输入通道可以由外部电源供电。然而，当公共外部电源用于两个或多个通道时，电缆巴伦模块有助于防止HART通信通道串扰。

施耐德电气品牌以及施耐德电气SE及其旗下的任何商标

本指南中提及的子公司是施耐德电气公司或其子公司的财产

分支机构。所有其他品牌可能是其各自所有者的商标。

本指南及其内容受适用的版权法保护

仅供参考。本指南的任何部分不得复制或传播

任何形式或通过任何手段(电子、机械、复印、记录或

(否则)，出于任何目的，未经施耐德电气事先书面许可。

施耐德电气不授予本指南商业用途的任何权利或许可

或其内容，除非获得非排他性和个人许可，以“原样”查阅其内容。

的基础上。施耐德电气的产品和设备应安装、操作、

仅由合格人员维修和保养。

随着标准、规范和设计的不断变化，信息

本指南中所包含的内容可随时更改，恕不另行通知。

在适用法律允许的范围内，不承担任何责任或义务

施耐德电气及其子公司在本信息中有任何错误或遗漏

本材料的内容或因使用本材料而引起的或导致的后果

FBM214B P0927AH 通信输入接口模块 模拟输入通道

【英文介绍】

FBM214B P0927AH Communication input interface module

The compact FBM214b HART communication input interface module contains eight independently isolated analog input channels from 4 to 20 mA. It supports any standard hybrid 4 to 20 mA devices and HART devices (signal electrical compatibility), as well as being part of the compact 200 Series I/O subsystem. The compact FBM214b can be used as a HART communication field device host, supporting Foxboro DCS to request and receive two digital messages per second from field devices.

The messaging function can be used to support HART general purpose, general purpose, and device-specific commands, but it cannot support burst communication mode. These commands are field equipment specialists using fox boro DCS HART. For more information, see Field Device Expert HART Device Control and I/O (PSS 41S-10FDMHRT). The FBM214b provides independent isolated power for each of the eight channels on the field equipment. Optionally, the input channel can be powered by an external power source. However, when the common external power supply is used for two or more channels, the cable Barron module helps prevent crosstalk in HART communication channels.

The Schneider Electric brand and Schneider Electric SE and any trademarks under it

Subsidiaries referred to in this Guide are the property of Schneider Electric Company or its subsidiaries

A branch office. All other brands may be trademarks of their respective owners.

This Guide and its contents are protected by applicable copyright laws

For reference only. No part of this Guide may be reproduced or disseminated

In any form or by any means (electronic, mechanical, photocopying, recording or

(otherwise), for any purpose without the prior written permission of Schneider Electric.

Schneider Electric does not grant any rights or licenses for commercial use of this Guide

Or its contents, unless non-exclusive and personal permission is granted, to view its contents "as is".

On the basis of. Schneider Electric products and equipment shall be installed, operated,

Repair and maintenance by qualified personnel only.

As standards, specifications and designs continue to change, information

The content contained in this Guide is subject to change at any time without notice.

To the extent permitted by applicable law, it accepts no responsibility or obligation

Schneider Electric and its subsidiaries have any errors or omissions in this information

The content of this material or the consequences arising from or resulting from the use of this material

FBM214B P0927AH 通信输入接口模块 模拟输入通道

【其他型号推荐】