ENTERASYS A4H124-24TX 以太网交换机模块

ENTERASYS A4H124-24TX 以太网交换机模块

ENTERASYS A4H124-24TX 以太网交换机模块

A4H124-24TX快速以太网交换机是存储转发堆叠式交换机，可以进行调整和扩展，以帮助满足您的网络需求。这些可堆叠交换机为多达八个A4H124-24TX交换机的堆叠组提供了管理平台和到网络主干的上行链路。您还可以将冗余电源与这些交换机一起使用，以帮助防止由于交换机或交流电源的内部电源故障而导致的停机。

您可以将可堆叠交换机安装在平面上或标准19英寸机架中，并使用WebView配置可堆叠交换机功能™ 应用程序、CLI切换命令和/或SNMP。A4H124-24TX堆叠式交换机可以通过RJ45连接器、SFP端口或千兆以太网端口连接到以太网或工作站，具体取决于您型号的配置。SFP端口支持可热插拔的可选可插拔收发器。 

ENTERASYS A4H124-24TX 以太网交换机模块

A4H124-24TX Fast Ethernet Switch is a store-and-forward stacked switch, which can be adjusted and expanded to help meet your network requirements. These stackable switches provide a management platform and an uplink to the network backbone for a stacked group of up to eight A4H124-24TX switches. You can also use redundant power supplies with these switches to help prevent downtime due to internal power failure of the switch or AC power supply.

You can install stackable switches on a flat surface or in a standard 19-inch rack, and use WebView to configure stackable switch function applications, CLI switching commands, and/or SNMP. A4H124-24TX stacked switch can be connected to Ethernet or workstation through RJ45 connector, SFP port or Gigabit Ethernet port, depending on the configuration of your model. SFP ports support optional pluggable transceivers that can be hot swapped.

ENTERASYS A4H124-24TX 以太网交换机模块