IC695PSA040F RX695i 模块内部使用 125伏直流，40瓦电源

☆型号：IC695PSA040F RX695i 模块内部使用 125伏直流，40瓦电源

【产品详情】

IC695PSA040是GE Fanuc RX3i系列的120/240伏交流或125伏直流，40瓦电源。它可以与交流或直流电的输入源一起使用。其工作电压为 85-264 VAC 或 100-300 VDC。

RX3i 电源有三个输出：

+3.3 VDC - 供具有 IC3 目录号的 RX695i 模块内部使用。

+5.1 伏直流电

+24 VDC 继电器 - 可用于为输出继电器模块上的电路供电。

PACSystems RX3i 电源是一个可扩展的基于机架的系统，可在各个模块之间提供快速、一致的控制。用户可以开发和维护自己的自定义控制功能。这包括可视化、运动和网络。

另一个很棒的功能是 PACMotion 控制器，它提供了在您的业务中使用高级机器自动化所需的所有灵活性和机器逻辑。

虽然专为支持 PACSystem RX3i 而设计，但通用背板一次只能安装一个IC695PSA040电源。该电源与其他 RX3i 电源不兼容，无论是在增加容量还是冗余模式下。

电源有四个 LED，用于指示电源的状态。 电源 LED 是顶部的 LED，当向背板供电时将呈绿色，如果电源开关关闭，则呈琥珀色。当 P/S 故障 LED 呈红色亮起时，电源出现故障，并且未向背板供电。当电源接近或高于最高工作温度时，过温 LED 呈琥珀色亮起。当电源接近或超过任何输出的最大输出能力时，过载 LED 呈琥珀色亮起。

重要的是，该装置的门在操作过程中保持关闭状态。 这样可以防止可能导致严重或致命伤害的电击危险。

技术规格

额定电压： 120/240 VAC 或 125 VDC

输入电压范围： 85 至 264 VAC 或 100 至 300 VDC

插槽数量： 2

输出功率： 最大 40 瓦

输出电压： 24 VDC、5.1 VDC 或 3.3 VDC

输出电流： 0-1.6 A、0-6 A 或 0-9 安培

☆型号：IC695PSA040F RX695i 模块内部使用 125伏直流，40瓦电源

【英文介绍】

The IC695PSA040 is a 40W power supply from the GE Fanuc RX3i series of 120/240 volts AC or 125 volts DC. It can be used with AC or DC input sources. Its operating voltage is 85-264 VAC or 100-300 VDC.

The RX3i power supply has three outputs:

+3.3 VDC - For internal use by RX695i modules with IC3 directory numbers.

+5.1 volts DC

+24 VDC relay - Can be used to power circuits on the output relay module.

The PACSystems RX3i power supply is a scalable rack-based system that provides fast, consistent control across modules. Users can develop and maintain their own custom control features. This includes visualization, motion, and networking.

Another great feature is the PACMotion controller, which provides all the flexibility and machine logic you need to use advanced machine automation in your business.

Although designed to support PACSystem RX3i, the universal backplane can only install one IC695PSA040 power supply at a time. This power supply is not compatible with other RX3i power supplies, either in increased capacity or redundancy mode.

The power supply has four leds that indicate the status of the power supply. The power LED is the top LED that will appear green when powering the backplane, or amber if the power switch is off. When the P/S failure LED lights up red, there is a power failure and no power is supplied to the backplane. When the power supply is near or above the maximum operating temperature, the overheated LED lights up in amber. When the power supply approaches or exceeds the maximum output capacity of any output, the overload LED lights up amber.

It is important that the doors of the unit remain closed during operation. This prevents the danger of electric shock that could cause serious or fatal injury.

Technical specification

Rated voltage: 120/240 VAC or 125 VDC

Input voltage range: 85 to 264 VAC or 100 to 300 VDC

Number of slots: 2

Output power: 40 watts Max

Output voltage: 24 VDC, 5.1 VDC or 3.3 VDC

Output current: 0-1.6A, 0-6 A or 0-9 amps

☆型号：IC695PSA040F RX695i 模块内部使用 125伏直流，40瓦电源

【其他型号推荐】