MPL-B430P-SJ24AA 低惯量伺服电机 具有单圈高分辨率编码器

【产品详情】

MPL-B430P-SJ24AA伺服电机由Allen-Bradley制造，是一款低惯量伺服电机。伺服电机的额定功率为 460 伏交流电，框架尺寸为 115 毫米。MPL-B430P-SJ24AA 伺服电机具有单圈高分辨率编码器，并配有面向轴的卡口。EMI（电磁干扰）会导致伺服电机性能不佳。性能差是由杂散信号的感应引起的。将信号电缆与电机电缆和电源线分开。避免将信号电缆与电机和电源线一起布线或穿过伺服电机通风口。MPL-B430P-SJ24AA伺服电机为每分钟5000转。低惯量伺服电机具有 3.0 英寸的磁堆叠长度。MPL-B430P-SJ24AA 伺服电机是一款 24 伏直流制动器，配有 IEC 公制安装法兰和标准工厂指定选项。

Allen-Bradley 低惯量高输出 MPL-B430P-SJ24AA 伺服电机采用创新设计，可最大限度地减小电机尺寸并确保提供高扭矩。MPL-B430P-SJ24AA伺服电机采用先进的设计，有助于伺服电机满足高性能应用的苛刻要求。MPL-B430P-SJ24AA 伺服电机采用智能电机技术，具有板载内存，有助于保留电机身份。伺服电机还具有 RS-485 通信端口，有助于自动连接设备并在电机启动时向系统报告身份。这确保了Allen-Bradley伺服电机的调试时间缩短。安装MPL-B430P-SJ24AA伺服电机时，必须确保满足最佳环境条件。确保电机没有封闭，除非有强制空气吹过电机以确保充分冷却。如果附近安装了其他发热设备，请确保它们远离电机。这确保了伺服电机的使用寿命更长。

MPL-B430P-SJ24AA 低惯量伺服电机 具有单圈高分辨率编码器

【英文介绍】

The MPL-B430P-SJ24AA servo motor, manufactured by Allen-Bradley, is a low inertia servo motor. The servo motor is rated at 460 volts AC and has a frame size of 115 mm. The MPL-B430P-SJ24AA servo motor features a single-turn high-resolution encoder with a shaft-oriented bayonet. EMI (electromagnetic interference) can cause poor performance of servo motors. The poor performance is caused by the induction of stray signals. Separate signal cables from motor cables and power cables. Avoid routing signal cables with motors and power cables or through servo motor vents. The MPL-B430P-SJ24AA servo motor is 5,000 RPM. The low inertia servo motor has a magnetic stack length of 3.0 inches. The MPL-B430P-SJ24AA servo motor is a 24-volt DC brake with an IEC metric mounting flange and standard factory specified options.

Allen-Bradley Low inertia High Output MPL-B430P-SJ24AA servo motors feature an innovative design that minimizes motor size and ensures high torque. The advanced design of the MPL-B430P-SJ24AA servo motor helps the servo motor meet the demanding requirements of high performance applications. The MPL-B430P-SJ24AA servo motor features smart motor technology with onboard memory to help preserve motor identity. The servo motor also has an RS-485 communication port that helps to automatically connect the device and report identity to the system when the motor is started. This ensures shorter commissioning times for Allen-Bradley servo motors. When installing the MPL-B430P-SJ24AA servo motor, it is necessary to ensure that optimal environmental conditions are met. Make sure the motor is not closed unless forced air is blown through the motor to ensure adequate cooling. If other heating devices are installed nearby, make sure they are away from the motor. This ensures a longer service life for the servo motor.

MPL-B430P-SJ24AA 低惯量伺服电机 具有单圈高分辨率编码器

【其他型号推荐】