150-F480NBDB智能电机控制器 固态器件

【产品详情】

Allen-Bradley 150-F480NBD是一款SMC Flex智能电机控制器。该电机控制器是一种固态器件，具有内置微处理器和完全可配置的参数，使该控制器能够通过控制器的嵌入式参数有效地控制交流电机。

150 F480NBD通过软启动、全电压启动、智能电机制动、限流启动、双斜坡启动、精确停止、可选启动、泵启动、带制动的低速、滑行到静止、预设慢速、线速度加速度（需要转速计）、软停止和泵停止来高效运行电机。这些可用的运行模式涵盖电机启动、停止，甚至在空闲运行状态下也是如此。它有效地保护电机免受不当操作的影响，并通过消除电机运行状态中不必要的偏移来降低能耗。

150-F480NBD 通过提供 200-460V AC 的电源电压来运行，三相，频率为 50 和 60 Hz，而设备的控制电压为 100-240V AC （5...480 A 单位）。在 460VAC 电压输入下，它提供 480 安培的最大连续输出电流和 400 HP 的输出功率。

该驱动控制器支持安装附件设备，例如人机接口模块 （HIM），带有手持式 HIM 或门装式 HIM 的变体。还可以安装通信模块，以允许驱动器通过现有的通信网络交换数据。支持的通信网络包括 DF1、Profibus DP、ControlNet、Interbus、MODBUS TCP、DeviceNet、Etehrnet I/P、HVAC 通信适配器和 ControlNet 光纤介质适配器。

150-F480NBDB智能电机控制器 固态器件

【英文介绍】

Allen-Bradley 150-F480NBD is an SMC Flex intelligent motor controller. The motor controller is a solid-state device with a built-in microprocessor and fully configurable parameters that enable the controller to effectively control the AC motor through the embedded parameters of the controller.

The 150 F480NBD runs the motor efficiently with soft start, full voltage start, smart motor braking, current limiting start, double ramp start, precision stop, optional start, pump start, low speed with brake, coast-to-rest, preset slow speed, linear acceleration (tachometer required), soft stop and pump stop. These available operating modes cover motor start, stop, and even in idle operation. It effectively protects the motor from improper operation and reduces energy consumption by eliminating unnecessary offsets in the motor's operating state.

The 150-F480NBD operates by providing a supply voltage of 200-460V AC, three phases, with frequencies of 50 and 60 Hz, while the device's control voltage is 100-240V AC (5... 480 A unit). At 460VAC voltage input, it provides a maximum continuous output current of 480 amps and an output power of 400 HP.

The drive controller supports the mounting of accessory devices, such as the Human Machine Interface Module (HIM), with variants of the handheld HIM or the door mounted HIM. Communication modules can also be installed to allow the drive to exchange data over the existing communication network. Supported communication networks include DF1, Profibus DP, ControlNet, Interbus, MODBUS TCP, DeviceNet, Etehrnet I/P, HVAC communication adapters, and ControlNet Fiber optic media adapters.

150-F480NBDB智能电机控制器 固态器件

【其他型号推荐】