2198-CAPMOD-2240 电容器模块 运动控制系统配置

【产品详情】

2198-CAPMOD-2240 是一款 Allen-Bradley Kinetix 5700 组件模块，用作电容器模块。该模块与轴逆变器、直流母线电源和其他 Kinetix 5700 模块一起安装在电源轨上。该电容器模块支持标准、非再生和再生 Kinetix 5700 运动控制系统配置。

2198-CAPMOD-2240 的主要预期功能包括增加储能和将直流母线电压扩展到另一个逆变器系统，以及作为有源外部分流模块的附加连接点。该模块也可用于具有高达 104 安培外部直流总线电流或与另一个附件模块并联的系统。该模块支持 Kinetix 5700 零堆叠设计，因为它保留了与左侧相邻模块锁存的零堆叠选项卡，以实现分片总线驱动配置。2198-CAPMOD-2240 所需的安装间隙为 29.5 毫米（1.16 英寸），用于盖板和直流总线布线，模块上方 115 毫米（4.53 英寸），模块前 100 毫米（3.94 英寸）。对于总线扩展，2198-CAPMOD-2240 作为集群 1 的最后一个模块安装，在 2198-DCBUSCOND-RP312 直流母线调节器模块之前安装，然后 2198-CAPMOD-2240 安装在集群 2 的 2198-DCBUSCOND-RP312 直流母线调节器模块之后，通过直流母线调节器模块电缆连接。除可用安装空间外，2198-CAPMOD-2240 实例的数量没有限制。2198-CAPMOD-2240 的每个实例都会增加 Kinetix 5700 组件的总系统电容，并增加储能。

Allen-Bradley 2198-CAPMOD-2240 模块是由 Allen-Bradley/Rockwell Automation 制造的 Kinetix 5700 系列电容器模块。它是 Allen-Bradley Kinetix 5700 变频器的附件模块，与 Kinetix 5700 系列中配置了直流母线电源、再生母线电源或 8720MC-RPS 电源的任何变频器系统兼容。2198-CAPMOD-2240 电容器模块可用于存储能量，将直流母线电压扩展到其他逆变器组，或用作外部有源分流模块的连接点。该电容器模块可用于外部直流母线电流额定值小于 104 安培的系统，但如果与自身或与其他附件模块并联使用，它可以处理高达 208 安培的电流。

Allen-Bradley 2198-CAPMOD-2240 Kinetix 5700 电容器模块可安装在零堆叠片和开孔中，便于安装。此安装设置用于确保系统中的所有模块连接器间隔正确，以便它们可以容纳共享总线连接系统。2198-CAPMOD-2240 电容器模块上方应留有间隙，以便技术人员在必要时轻松使用直流母线螺柱进行维修。有些系统可以容纳多个 2198-CAPMOD-2240 电容器模块，每个单独的电容器模块都会增加系统的储能容量和总系统电容额定值。系统可以容纳的 2198-CAPMOD-2240 电容器模块的确切数量取决于系统的总电容额定值。

2198-CAPMOD-2240 电容器模块 运动控制系统配置

【英文介绍】

The 2198-CAPMOD-2240 is an Allen-Bradley Kinetix 5700 module used as a capacitor module. The module is mounted on the power rail along with the shaft inverter, DC bus power supply and other Kinetix 5700 modules. The capacitor module supports standard, non-regenerative and regenerative Kinetix 5700 motion control system configurations.

The main expected functions of the 2198-CAPMOD-2240 include increasing energy storage and extending the DC bus voltage to another inverter system, as well as acting as an additional connection point for an active external shunt module. The module can also be used in systems with up to 104 amps of external DC bus current or in parallel with another accessory module. This module supports the Kinetix 5700 zero-stack design as it retains the zero-stack TAB latched to the adjacent module on the left for a shard bus driver configuration. The required mounting clearance for the 2198-CAPMOD-2240 is 29.5 mm (1.16 in) for cover plate and DC bus wiring, 115 mm (4.53 in) above the module and 100 mm (3.94 in) in front of the module. For bus expansion, 2198-CAPMOD-2240 is installed as the last module in Cluster 1, before 2198-DCBUSCOND-RP312 DC bus regulator module, The 2198-CAPMOD-2240 is then installed after the 2198-DCBUSCOND-RP312 DC bus regulator module in Cluster 2 and connected via the DC bus regulator module cable. There is no limit to the number of instances of 2198-CAPMOD-2240 except for the available installation space. Each instance of the 2198-CAPMOD-2240 increases the total system capacitance of the Kinetix 5700 component and increases energy storage.

The Allen-Bradley 2198-CAPMOD-2240 module is a Kinetix 5700 series capacitor module manufactured by Allen-Bradley/Rockwell Automation. It is an accessory module to Allen-Bradley Kinetix 5700 drives and is compatible with any drive system in the Kinetix 5700 series equipped with DC bus power, regenerative bus power or 8720MC-RPS power. The 2198-CAPMOD-2240 capacitor module can be used to store energy, extend the DC bus voltage to other inverter banks, or as a connection point for external active shunt modules. The capacitor module can be used in systems with an external DC bus current rating of less than 104 amps, but if used in parallel with itself or with other accessory modules, it can handle currents up to 208 amps.

Allen-Bradley 2198-CAPMOD-2240 Kinetix 5700 capacitor modules can be installed in zero stack sheets and openings for easy installation. This installation setting is used to ensure that all module connectors in the system are properly spaced so that they can accommodate a shared bus connection system. The 2198-CAPMOD-2240 capacitor module should have a clearance above it so that technicians can easily use DC bus studs for servicing if necessary. Some systems can accommodate multiple 2198-CAPMOD-2240 capacitor modules, with each individual capacitor module increasing the system's energy storage capacity and total system capacitance rating. The exact number of 2198-CAPMOD-2240 capacitor modules that the system can accommodate depends on the total capacitance rating of the system.

2198-CAPMOD-2240 电容器模块 运动控制系统配置

【其他型号推荐】