2711P-T15C22D9P 操作终端 主要具有15英寸彩色TFT显示屏
【产品详情】
| 产品类型： | PanelView Plus 7 15 英寸高性能终端 |
| 功耗： | 最大 50 W（24V DC 时为 2.1 A） |
| 系统内存： | 512 RAM、512 MB 非易失性存储器（约 80 MB 可用用户存储器） |
| 触摸： | 模拟电阻驱动：100万次按压;操作力： 100 g |
| 输入电压范围： | 18-30 伏直流电 |
| 通讯端口： | 两 （2） 个以太网，三 （3） 个 USB 主机 |
| 应用程序内存： | 1GB系统;用户内存 512 MB |
| 背光： | 白色发光二极管，固态 寿命：40 °C （104 °F） 至半亮时 50,000 小时分钟，背光不可更换 |
2711P-T15C22D9P 是一款 PanelView Plus 7 Performance 操作终端。该操作终端主要具有15英寸彩色TFT显示屏，触摸输入接口和双以太网通信接口。
该操作员的显示屏具有 304 x 228 毫米（12.0 x 9.0 英寸）的可视区域和 1024 x 768 XGA 的显示分辨率，支持 18 位彩色图形。该显示屏支持 4：3 的纵横比，以及典型亮度为 300 cd/m2 （尼特） 的背光。该背光源由固态白光发光二极管制成，最短半衰期为 50,000 小时。在 40 °C （104 °F） 下运行时。触摸界面由模拟电阻式触摸敏感单元制成，设计为以 100 克的驱动力在多达 100 万次的压力下启动。建议使用戴手套的手指或塑料手写笔操作此操作终端。
可根据需要进行屏幕管理和维护。显示屏支持校准、亮度和对比度调节以及屏幕保护程序。这些调整延长了背光的使用寿命，从而最大限度地提高了终端的使用率。
该操作终端的电源电压要求为 18-32VDC，最大功耗为 50 W，24V DC 时为 2.1 A。该操作终端的物理尺寸为 318（高）x 381（宽）x 69.6（深）或毫米 12.52（高）x 15.00（宽）x 2.74 英寸（深）。要安装此操作终端，所需的面板开孔为 290（高）x 353（宽）毫米或 11.42（高）x 13.90 英寸（宽）。
该操作终端可以安装外部存储器存储器，例如 Allen-Bradley 的 1784-SDx 和 1784-SDHCx 卡或插入主机 USB 接口的外部闪存驱动器。该操作终端由外部直流电压供电tage 范围为 18-30 VDC。2711P-T15C22D9P 具有内置的双以太网通信端口，兼容连接或实现线性、星形和环形拓扑结构。
2711P-T15C22D9P 操作终端 主要具有15英寸彩色TFT显示屏
【英文介绍】
The 2711P-T15C22D9P is a PanelView Plus 7 Performance terminal. The operating terminal mainly has a 15-inch color TFT display, touch input interface and dual Ethernet communication interface.
The operator's display has a viewing area of 304 x 228 mm (12.0 x 9.0 in) and a display resolution of 1024 x 768 XGA, supporting 18-bit color graphics. The display supports a 4:3 aspect ratio and a typical brightness of 300 cd/m2 (nits) backlight. The backlight is made from a solid-state white light emitting diode with a minimum half-life of 50,000 hours. When operating at 40 °C (104 °F). The touch interface is made from an analog resistive touch sensitive unit designed to start at up to 1 million times of pressure with 100 grams of driving force. It is recommended to use a gloved finger or a plastic stylus to operate this terminal.
Screen management and maintenance can be performed as required. The display supports calibration, brightness and contrast adjustment, and screen savers. These adjustments extend the life of the backlight, thereby maximizing the utilization of the terminal.
The power supply voltage of this operating terminal is required to be 18-32VDC, and the maximum power consumption is 50 W, and 2.1 A at 24V DC. The physical dimensions of this operating terminal are 318 (H) x 381 (W) x 69.6 (D) or mm 12.52 (H) x 15.00 (W) x 2.74 inches (D). To install this operating terminal, the required panel openings are 290 (H) x 353 (W) mm or 11.42 (H) x 13.90 inches (W).
The operating terminal can be equipped with external memory memory such as Allen-Bradley's 1784-SDx and 1784-SDHCx cards or an external flash drive plugged into the host USB port. The operating terminal is powered by an external DC voltage tage range of 18-30 VDC. The 2711P-T15C22D9P has built-in dual Ethernet communication ports for compatible connections or linear, star and ring topologies.
2711P-T15C22D9P 操作终端 主要具有15英寸彩色TFT显示屏
【其他型号推荐】
| BENTLY 135489-03 3500/42M小卡 | 数字量输出子模件 | Bently Nevada |
| BENTLY 135489-01 3500/42M小卡 | 多功能控制器 | Bently Nevada |
| BENTLY 330130-045-00-00 | 数字量输入子模件 | Bently Nevada |
| BENTLY 3500/25 | 控制输入输出子模件 | Bently Nevada |
| BENTLY 149992-01 3500/33小卡 | 模拟量输入子模件 | Bently Nevada |
| BENTLY 3500/34 | DCS控制器模块 | Bently Nevada |
| BENTLY 146031-01 | 模拟量输出子模件 | Bently Nevada |
| BENTLY 1900/27 | 隔离模拟信号输入模件 | Bently Nevada |
| BENTLY 3500/50 | 变频器触发板 | Bently Nevada |
| BENTLY 3500/33 | I/O扩展接口板 | Bently Nevada |
| BENTLY 1900/65A | 励磁通讯适配器 | Bently Nevada |
| BENTLY 3500-20-01 | 通用电气模块 | Bently Nevada |
| BENTLY 3500-20-01 | 以太网模块 | Bently Nevada |
| BENTLY 35001513330001 | 火检处理器 | Bently Nevada |
| BENTLY 35001513329201 | 测量板 | Bently Nevada |
