Allan Bradley  1756-IF8IK 隔离式模拟输入模块

【产品详情】

1756-IF8IK 是 Allan Bradley 的 ControlLogix 隔离式模拟输入模块，无需任何额外布线或外部 HART 多路复用器即可直接完美连接到 HART 设备。通过包含此模型，可以访问更多面向字段的设备数据，例如HART主值、辅助值、第三值、第四值和其他设备状态信息。直接连接的HART设备由该模型单独管理;它有 8 个通道，每个通道都有一个专用的 HART 调制解调器。

这种通信设备共形涂有聚合物薄膜，可均匀地提供恶劣条件的保护。

1756-IF8IK 在 60 摄氏度时的最大功耗为 5.2 瓦。该设备的 IO 范围从 0 到 10 伏不等;它具有 24 位分辨率，可消耗 200 mA 的 5.1 伏电压。

1756-IF8IK 单元提供 1756-TBNH 和 1756-TBSH 的可拆卸接线端子。该型号还消耗 150 或 400 mA 的 24 伏电压。各种电压使设备在各种具有挑战性的情况下都能平稳运行。该型号在 5 V 时可耗散 100 mA 的背板电流，在 24 V 时可耗散 3 mA 的背板电流。

Allan Bradley  1756-IF8IK 隔离式模拟输入模块

【英文介绍】

The 1756-IF8IK is Allan Bradley's ControlLogix isolated analog input module that perfectly connects directly to HART devices without any additional wiring or external HART multiplexers. By including this model, you can access more field-oriented device data, such as HART primary values, secondary values, third values, fourth values, and other device state information. Directly connected HART devices are managed separately by the model; It has 8 channels, each with a dedicated HART modem.

This communication device is conformally coated with a polymer film that uniformly provides protection against harsh conditions.

The 1756-IF8IK has a maximum power consumption of 5.2 watts at 60 degrees Celsius. The device's IO ranges from 0 to 10 volts; It has a 24-bit resolution and can consume 5.1 volts at 200 mA.

The 1756-IF8IK unit offers detachable terminals for 1756-TBNH and 1756-TBSH. This model also consumes 24 volts of 150 or 400 mA. The variety of voltages allows the equipment to operate smoothly in a variety of challenging situations. This model dissipates 100 mA of backplane current at 5 V and 3 mA of backplane current at 24 V.

Allan Bradley  1756-IF8IK 隔离式模拟输入模块

【其他型号推荐】