1756-IF16IHK HART 接口模块 具有 16 路输入

【产品详情】

Allen Bradley 1756-IF16IHK 产品主要用于确认和监控来自 HART 设备的数字和模拟数据。这种型号的数字 I/O 模块可以从任何远程工作站进行操作，并且通道可通过单个位置查看。

这种特殊型号的HART设备具有16个输入通道。它也可以非常容易地安装在 ControlLogix 机箱上。1756-IF16IHK 中提供的所有现场侧接线要么是可拆卸接线端子，要么是基于 1492 接线接口的公告;此功能允许用户连接所有远程现场接线，而不会出现任何故障。

1756-IF16IHK由HART主值、次级值、第三值和第四值支持，可用作控制应用中的控制器标签。

该装置非常有益，允许用户直接连接到HART设备，而无需任何外部多路复用器或额外布线的帮助。

该特定模块的输入电流范围为 0 至 20 mA，在 5.1 V 时为 4 至 20 mA，而其浪涌电流容量可在 5.1 V DC 时测量为 400 mA，在最大 24 V DC 时测量为 450 mA。

1756-IF16IHK HART 接口模块 具有 16 路输入

【英文介绍】

Allen Bradley 1756-IF16IHK products are primarily used to confirm and monitor digital and analog data from HART devices. This model of digital I/O module can be operated from any remote workstation, and the channel can be viewed from a single location.

This particular type of HART device has 16 input channels. It can also be very easily installed on the ControlLogix chassis. All field side wiring provided in the 1756-IF16IHK is either detachable terminal or based on the 1492 connector announcement; This feature allows users to connect all remote field connections without any failures.

The 1756-IF16IHK is supported by HART primary, secondary, third, and fourth values and can be used as controller labels in control applications.

This device is very beneficial, allowing users to connect directly to HART devices without the help of any external multiplexers or additional wiring.

This particular module has an input current range of 0 to 20 mA and 4 to 20 mA at 5.1V DC, while its surge current capacity can be measured as 400 mA at 5.1V DC and 450 mA at a maximum of 24 V DC.

1756-IF16IHK HART 接口模块 具有 16 路输入

【其他型号推荐】