1756-IB16K  12/24V DC D/I 模块

【产品详情】

安装在 ControlLogix® 机架中

需要可拆卸端子块 (RTB) 或 Bulletin 1492 接线接口模块 (IFM) 来进行所有现场接线

包含固有的时间戳功能，适用于事件序列 (SOE) 应用项目

提供 EtherNet/IP™ 通信，包括 CIP Security™ 和冗余功能

可实现全面的 I/O 诊断，从而能够检测系统故障和现场故障

可带电插拔 (RIUP)，便于维护

提供电子键控功能，有助于防止替换错误

在 Studio 5000 Logix Designer® 应用程序中包含 I/O 向导，可快速方便地进行模块配置

1756 ControlLogix CIP 安全 I/0 模块

支持 Compact GuardLogix® 5380 或 GuardLogix 5580 控制台

提供高达（包括）SIL3 和 PLe 的功能安全等级

支持 CIP Safety 信息转发和路由功能

用作 5580 GuardLogix 控制器的本地 I/O 或分布式 I/O

提供更快的响应时间

使用 Logix Designer 应用程序版本 32

提供数字输入模块：IB16S – 16 通道（各个等级均为 SIL 3）

提供数字输出模块：OBV8S – 8 通道（各个等级均为 SIL 3）

包括合规性标记：TÜV，UL, IECEx, ATEX, CE, Marine, FM

ControlLogix 数字量 I/O 模块

提供各种电压

每个模块提供 8 至 32 个点

具备隔离和非隔离模块类型

包含通道级故障状态输出

可实现直接连接或机架优化通信

对选定模块进行现场诊断

1756 ControlLogix 模拟量 I/O 模块

包含输入、输出和组合模块

提供热电偶和热电阻模块

包含模块级别数据报警

提供工程单位整定

提供实时通道采样

提供电子模块匹配，可通过软件配置

包含机械可拆卸端子块匹配，用户自定义

逐通道配置电压、电流或 2 线变送器电流源流型

逐通道配置热电阻或热电偶

ControlLogix 1756 带隔离的模拟量 I/O 6 通道模块将于 2017 年 3 月 31 日停产，不再销售。建议客户根据 6 通道至 8 通道 1756 模拟量模块迁移指南迁移至 1756 隔离模拟量 I/O 8 通道模块

1756 ControlLogix 特殊功能 I/O 模块

包含可配置的流量计模块

提供高速计数器模块

提供可编程限位开关模块

1756 ControlLogix 可拆卸端子块 (RTB)

实现工厂接线与 I/O 模块之间的灵活互连

包含螺丝夹或弹簧夹端子

不附带 I/O 模块；必须单独订购

1756 HART 总线模拟量隔离 I/O 模块

提供通道间隔离

逐通道提供 HART 总线调制解调器，从而提高 HART 总线数据更新速度

通过用户自定义配置文件提供基本现场设备配置

帮助消除在使用隔离模块时对现场隔离屏障的需要

提供 8 或 16 通道密度模块

1756 增强型模拟量 I/O 模块

可提高准确性、可重复性、稳定性和精度

包含隔离 8 通道以及非隔离 12 和 16 通道模块，可在整个运行温度范围内实现稳定运行

无需现场校准

使用 24 位设计可提高精度

包含每通道状态和故障指示灯指示

提供 SIL 1、系统功能 2，且已通过类型认证，可应用在 ControlLogix SIL 2 架构中

提供仿真模式，可帮助客户从 6 通道应用项目进行升级

1756 通信模块

在 1756 机架中对用户、设备和网络实施基于网络的访问控制

提供冗余功能

提供安全模块，用于对控制器和服务器之间共享的重要信息进行加密，以防止篡改

1756 计算模块

可通过背板提供对 ControlLogix 控制器的高速访问

集成的 DisplayPort™ 可实现高清 5100 工业监视器的直接连接

可在 ControlLogix 机架中提供计算能力

1756-IB16K  12/24V DC D/I 模块

【英文介绍】

Mounts in the ControlLogix® rack

A removable terminal block (RTB) or Bulletin 1492 Wiring Interface Module (IFM) is required for all field wiring

Includes built-in timestamp functionality for event sequence (SOE) applications

Provides EtherNet/IP™ communications, including CIP Security™ and redundancy capabilities

Comprehensive I/O diagnostics enable detection of system failures and field failures

Live pluggable (RIUP) for easy maintenance

Electronic keying is provided to help prevent replacement errors

I/O wizards are included in the Studio 5000 Logix Designer® application for quick and easy module configuration

1756 ControlLogix CIP Secure I/0 module

Compact GuardLogix® 5380 or GuardLogix 5580 console is supported

Functional safety levels up to (including) SIL3 and PLe are available

Supports CIP Safety information forwarding and routing

Local or distributed I/O for use as the 5580 GuardLogix controller

Provides faster response times

Use the Logix Designer application version 32

Digital input modules available: IB16S-16 channels (SIL 3 for all grades)

Digital output modules available: OBV8S-8 channels (SIL 3 for all grades)

Includes compliance marks: TUV, UL, IECEx, ATEX, CE, Marine, FM

ControlLogix Digital I/O module

Various voltages available

Each module provides 8 to 32 points

Both isolated and non-isolated module types are available

Contains channel-level fault status output

Direct connection or rack-optimized communication is possible

Field diagnostics for selected modules

1756 ControlLogix Analog I/O module

Contains input, output, and combination modules

Thermocouple and thermal resistance modules available

Contains module-level data alarms

Provide engineering unit setting

Provides real-time channel sampling

Provides electronic module matching and can be configured through software

Contains mechanical detachable terminal block matching, user-defined

Configure voltage, current, or 2-wire transmitter current source flow pattern on a channel-by-channel basis

Configure thermal resistors or thermocouples on a channel-by-channel basis

The ControlLogix 1756 analog I/O 6-channel module with isolation will be discontinued on March 31, 2017 and will no longer be sold. Customers are advised to migrate to the 1756 isolated analog I/O 8-channel module by following the 6-to-8-channel 1756 Analog Module Migration Guide

1756 ControlLogix Special function I/O module

Includes configurable flow meter modules

High speed counter module available

Programmable limit switch module available

1756 ControlLogix Detachable Terminal Block (RTB)

Flexible interconnection between factory wiring and I/O modules

Includes screw clamp or spring clamp terminals

No I/O module; Must be ordered separately

1756 HART bus analog isolated I/O module

Provides isolation between channels

HART bus modems are provided on a channel-by-channel basis to improve HART bus data update speed

You can configure basic onsite devices through user-defined profiles

Helps eliminate the need for on-site isolation barriers when using isolation modules

Available in 8 or 16 channel density modules

1756 Enhanced analog I/O module

Improves accuracy, repeatability, stability and precision

Includes isolated 8-channel and non-isolated 12 and 16-channel modules for stable operation over the entire operating temperature range

No field calibration required

Use 24-bit design to improve accuracy

Contains each channel status and fault indicator

Provides SIL 1, System function 2, and is type-certified for use in the ControlLogix SIL 2 architecture

Simulation mode is available to help customers upgrade from 6-channel application projects

1756 Communication module

Implement network-based access control for users, devices, and networks in 1756 racks

Provides redundancy functions

Provides a security module for encrypting important information shared between the controller and server to prevent tampering

1756 Compute Module

High-speed access to the ControlLogix controller is provided through the backplane

The integrated DisplayPort™ enables direct connectivity of HD 5100 industrial monitors

Computing power is available in the ControlLogix rack

1756-IB16K  12/24V DC D/I 模块

【其他型号推荐】