Allen-Bradley 1756-IA32 数字 I/O 模块
【产品详情】
Allen-Bradley 1756-IA32 是一款ControlLogix 数字 I/O 模块。
该交流输入模块有一个显示屏,用户可以在其中检查其输入和通信状态,以及模块的健康状况。该特定模块有 32 个输入可用,每组有 16 个可用点。与 1756-IA32 兼容的可拆卸接线端子外壳或 RTB 是 1756-TBCH 和 1756-TBS6H。
该模块的连续隔离电压为 250 V。其电压类别为 120 V AC 和 50/60 Hz,与其输入电压相同。该模块在 24 V 时的电流消耗为 2mA,在 5.1 V 时为 165 mA。工作电压范围为 74 至 132 V AC 和 47 至 63 Hz,0.9 W 是 1756-IA32 模块的总背板功率,最大浪涌电流为 390 mA。从开关到开机,从开关到开机的输入延迟时间,该模块的硬件延迟标称值为 1.5 ms 或最大值 10 ms,加上用户可选择的滤波时间(1 ms 或 2 ms),而从开到关,硬件延迟标称值为 1 ms,最大值为 8 ms,加上用户可选择的滤波时间(9 ms 或 18 ms)。60 摄氏度时的最大功耗为 6.1 W,散热为 20.8 BTU/小时。在关断状态下,最大电压为 20 V,最大电流为 2.5 mA。另一方面,导通状态的电流范围从 74 V AC 时的最小 5 mA 到 132 V AC 时的最大 15 mA。Allen-Bradley 1756-IA32 是一款 ControlLogix 交流输入模块,主要用于连接输入或信号设备,提供范围为 74-132VAC 的交流输入信号。
该模块是一个高密度输入模块,具有三十二 (32) 个输入通道,分为两 (2) 个,每组有十六 (16) 个通道。该模块具有组到组隔离,即使组出现故障,模块也能正常工作。此外,它还具有输入到背板的隔离功能,但是,它在输入通道之间没有隔离。
1756-IA32 是 ControlLogix 可编程自动化控制器 (PAC) 产品系列的一部分。该输入模块的每个通道都具有固定的硬件延迟,例如OFF至ON转换中的1.5 ms延迟和ON至OFF转换中的1 ms延迟。用户可配置的延迟也可以通过滤波时间选项进行设置,包括 1 ms 或 2 ms 的 OFF 到 ON 转换以及 9 ms 或 18 ms 的 ON 到 OFF 转换。
要端接 1756-IA32 的输入信号,需要可拆卸接线端子 (RTB) 模块。兼容的 RTB 模块包括 1756-TBCH(笼式夹端子)和 1756-TBSH(弹簧夹端子)。
该模块在 5.1V 时的电流消耗为 165 mA,在 24VDC 时为 2 mA,背板功耗为 0.9 W,60 摄氏度时的功耗为 6.1 W,散热为 20.8 BTU/hr。
Allen-Bradley 1756-IA32 数字 I/O 模块
【英文介绍】
The Allen-Bradley 1756-IA32 is a ControlLogix digital I/O module.
The AC input module has a display where the user can check their input and communication status, as well as the health of the module. This particular module has 32 inputs available, with 16 points available in each group. The removable terminal housing or RTB compatible with 1756-IA32 are the 1756-TBCH and 1756-TBS6H.
The module has a continuous isolation voltage of 250 V. Its voltage classes are 120 V AC and 50/60 Hz, the same as its input voltage. The current consumption of the module is 2mA at 24 V and 165 mA at 5.1 V. Operating voltages range from 74 to 132 V AC and 47 to 63 Hz, with 0.9 W being the total backplane power of the 1756-IA32 module and a maximum inrush current of 390 mA. The input delay time from switch to power on, from switch to power on, the hardware delay nominal value of the module is 1.5 ms or a maximum of 10 ms, plus the user's choice of filtering time (1 ms or 2 ms), while from on to off, the hardware delay nominal value is 1 ms, the maximum value is 8 ms, and the input delay time is 1 ms. Plus a user selectable filtering time (9 ms or 18 ms). The maximum power consumption at 60 degrees Celsius is 6.1 W and the heat dissipation is 20.8 BTU/ hour. In the off state, the maximum voltage is 20 V and the maximum current is 2.5 mA. On the other hand, the current in the on-state ranges from a minimum of 5 mA at 74 V AC to a maximum of 15 mA at 132 V AC. The Allen-Bradley 1756-IA32 is a ControlLogix AC input module designed primarily to connect input or signal devices, providing AC input signals in the 74-132VAC range.
The module is a high-density input module with thirty-two (32) input channels divided into two (2) groups of sixteen (16) channels. The module has group to group isolation, which allows the module to function even if the group fails. In addition, it has an isolation feature for input to the backplane, however, it has no isolation between input channels.
The 1756-IA32 is part of the ControlLogix Programmable Automation Controller (PAC) product family. Each channel of the input module has a fixed hardware delay, such as 1.5 ms delay in the OFF to ON conversion and 1 ms delay in the ON to OFF conversion. User-configurable latency can also be set by filtering time options, including 1 ms or 2 ms OFF to ON conversion and 9 ms or 18 ms ON to OFF conversion.
To terminate 1756-IA32 input signals, a detachable terminal (RTB) module is required. Compatible RTB modules include 1756-TBCH (cage clamp terminal) and 1756-TBSH (spring clamp terminal).
The module has a current consumption of 165 mA at 5.1V, 2 mA at 24VDC, a backplane power consumption of 0.9 W, a power consumption of 6.1 W at 60 degrees Celsius, and a heat dissipation of 20.8 BTU/hr.
Allen-Bradley 1756-IA32 数字 I/O 模块
【其他型号推荐】
TRICONEX 4351A | Triconex DCS | 数字示波器 | BENTLY 35000401 | 栈板卡板 | Bently Nevada |
TRICONEX 9563-810 | Triconex DCS | DI接线底板 | BENTLY 350004 | 脉冲放大板 | Bently Nevada |
TRICONEX 9662-810 | Triconex DCS | DO接线底板 | BENTLY 35000301 | 输入控制板 | Bently Nevada |
TRICONEX 3503E | Triconex DCS | 数字输入模块 | BENTLY 35000201 | 通用变频器 | Bently Nevada |
TRICONEX 8312 | Triconex DCS | 电源模块 | BENTLY 35000101 | 控制模块卡键 | Bently Nevada |
TRICONEX 3805E | Triconex DCS | 卡件模块 | BENTLY 3500/95 | 系统板卡 | Bently Nevada |
TRICONEX 3503E | Triconex DCS | DCS卡件 | BENTLY 3500/94 | 变频器驱动单元 | Bently Nevada |
TRICONEX 4351B | Triconex DCS | DI卡件 | BENTLY 3500/93135799-01 | 传感器 | Bently Nevada |
TRICONEX 4211 | Triconex DCS | 控制器 | BENTLY 3500/93135785-01 | 系统备件 | Bently Nevada |
TRICONEX 3401 | Triconex DCS | DI卡件 | BENTLY 3500/93-08-01-01-01 | 控制器主单元 | Bently Nevada |
TRICONEX 3664 | Triconex DCS | 变频器操作面板 | BENTLY 3500/93-07-01-02-00 | 控制面板 | Bently Nevada |
TRICONEX 8112 | Triconex DCS | 主处理器模块 | BENTLY 3500/93-03-01-00-00 | 张力控制器 | Bently Nevada |
TRICONEX 3625 | Triconex DCS | 通讯模块 | BENTLY 3500/93-03-01-00 | 张力放大器控制器 | Bently Nevada |