Allen Bradley 1756-ESMCAPK 储能模块

【产品详情】

Allen Bradley ControlLogix 储能模块，在 5.1 V 直流电流消耗下具有 330 mA 电流 是一款 ControlLogix 通信模块。它是一种EtherNet/IP（以太网工业协议）接口通信模块。该公司已停产，取而代之的是具有相同规格的新型号 。它支持常规消息传递、实时 I/O 消息传递以及实时控制、时间同步和运动等应用程序的信息交换。1756-ENET 还允许同时传输安全和控制数据以及诊断信息，从而满足 CIP 安全标准。它使用先进的通信芯片和物理介质。模块具有 100 Mbps 的 EtherNet/IP 通信速率，并使用铜线。它支持 128 个 Logix 和 64 个 TCP/IP 通信连接。它最多可以支持 8 个轴，用于以太网/IP 网络上的集成运动。它在 5.1V DC 时消耗 700 mA 电流，在 24V DC 时消耗 3 mA 电流。它的最大功耗为 3.7 W，散热为 12.6 BTU/小时。它可以安装在 ControlLogix 机箱的任何插槽中。在接线方面，它使用非屏蔽 RJ45 5 类双绞线电缆连接器与控制器连接。要运行 EtherNet/IP 网络，必须定义 IP 地址、子网掩码、网关等参数。 网桥具有多种功能，例如为消息传递、分布式 I/O 和标记提供支持。它将消息封装在标准 TCP/IP 协议中。ControlNet 和 DeviceNet 网络协议允许它共享一个通用的应用层。它不需要任何调度或路由表来存储信息。其他功能包括显式保护模式、电子密钥、设备级环形网络和并行冗余协议网络支持。

 Allen Bradley 1756-ESMCAPK 储能模块

【英文介绍】

 The Allen Bradley ControlLogix energy storage module with 330 mA current at 5.1 V DC current consumption is a ControlLogix communication module. It is an EtherNet/IP (Ethernet Industrial Protocol) interface communication module. The company has been discontinued and replaced with a new model with the same specifications. It supports regular messaging, real-time I/O messaging, and information exchange for applications such as real-time control, time synchronization, and motion. The 1756-ENET also allows the simultaneous transmission of security and control data as well as diagnostic information, thus meeting CIP safety standards. It uses advanced communication chips and physical media. The module has an EtherNet/IP communication rate of 100 Mbps and uses copper wire. It supports 128 Logix and 64 TCP/IP communication connections. It can support up to 8 axes for integrated motion over Ethernet /IP networks. It consumes 700 mA of current at 5.1V DC and 3 mA of current at 24V DC. It has a maximum power consumption of 3.7W and a heat dissipation of 12.6 BTU/ hour. It can be installed in any slot in the ControlLogix chassis. In terms of wiring, it uses an unshielded RJ45 Class 5 twisted pair cable connector to connect to the controller. To run an EtherNet/IP network, you must define parameters such as IP address, subnet mask, gateway, and so on. Bridges have a variety of functions, such as support for messaging, distributed I/O, and markup. It encapsulates the message in the standard TCP/IP protocol. The ControlNet and DeviceNet network protocols allow it to share a common application layer. It does not require any scheduling or routing tables to store information. Additional features include explicit protection modes, electronic keys, device-level ring networking, and parallel redundancy protocol networking support.

 Allen Bradley 1756-ESMCAPK 储能模块

【其他型号推荐】