1756-EN2TK 以太网通信模块 可以支持 8 个轴

【产品详情】

1756-EN2TK 的电流消耗为 1.2 安培，5.1VDC 和 3 mA，24VDC 时，功耗为 6.2 瓦，散热为 21.28 BTU/小时。 1756-EN2F 桥接器还具有 CIP 安全标准，允许同时传输安全和控制数据以及诊断信息。

它使用先进的通信芯片和物理介质。1756-EN2TK模块具有 100 Mbps 的 EtherNet/IP 通信速率，并使用光纤。它支持 256 个 Logix 和 128 个 TCP/IP 通信连接。它最多可以支持 8 个轴，用于以太网/IP 网络上的集成运动。它在 5.1V DC 时消耗 1.2 A 电流，在 24V DC 时消耗 3 mA 电流。它的最大功耗为 6.2 W，散热为 21.28 BTU/小时。它可以安装在任何 ControlLogix 机箱插槽中。在接线方面，它使用非屏蔽 RJ45 5 类双绞线电缆连接器与控制器连接。要运行 EtherNet/IP 网络，必须定义 IP 地址、子网掩码、网关等参数。1756-EN2F 网桥具有多种功能，例如为消息传递、分布式 I/O 和标记提供支持。它将消息封装在标准 TCP/IP 协议中。

1756-EN2TK 以太网通信模块 可以支持 8 个轴

【英文介绍】

The 1756-EN2F has a current consumption of 1.2 amps, 5.1VDC and 3 mA, and at 24VDC, a power consumption of 6.2 watts and a heat dissipation of 21.28 BTU/ hour. The 1756-EN2F bridge also features the CIP safety standard, allowing simultaneous transmission of security and control data as well as diagnostic information.

It uses advanced communication chips and physical media. The 1756-EN2F module has an EtherNet/IP communication rate of 100 Mbps and uses fiber optics. It supports 256 Logix and 128 TCP/IP communication connections. It can support up to 8 axes for integrated motion over Ethernet /IP networks. It consumes 1.2 A current at 5.1V DC and 3 mA current at 24V DC. It has a maximum power consumption of 6.2W and a heat dissipation of 21.28 BTU/ hour. It can be installed in any ControlLogix chassis slot. In terms of wiring, it uses an unshielded RJ45 Class 5 twisted pair cable connector to connect to the controller. To run an EtherNet/IP network, you must define parameters such as IP address, subnet mask, gateway, and so on. The 1756-EN2F bridge has a variety of functions, such as support for messaging, distributed I/O, and markup. It encapsulates the message in the standard TCP/IP protocol.

【其他型号推荐】