1756-CJC 热电偶传感器套件 冷端补偿套件

【产品详情】

Allen-Bradley 的 1756-CJC ControlLogix 热电偶传感器套件是一款具有 2 个跳线的冷端补偿热敏电阻，可与 1756-IRT8I 或 1756-IT16 模块配合使用。冷补偿热敏电阻是一种与温度相关的电阻器，用于热电偶模拟输入模块中需要温度校正的情况。

Allen-Bradley 1756-CJC 是一款 ControlLogix 冷端补偿套件。

1756-CJC 为用户提供与 1756-IRT88I 和 1756-IT16 模拟模块兼容的传感器。此 1756-CJC 附件主要用于这些模块处于热电偶模式时，因为这些模块本身缺少必要的 CJC 传感器。1756-CJC用于温度校正，提高了热电偶读数的整体精度。如果模块的通道接线通过 RTB 连接，则需要 ControlLogix 1765-CJC 冷端补偿套件。

一个冷端补偿套件包含两个跳线，并连接到模块的螺丝端子上。环境工作温度必须在 0 到 60 摄氏度之间。

1756-CJC 热电偶传感器套件 冷端补偿套件

【英文介绍】

Allen-Bradley's 1756-CJC ControlLogix thermocouple sensor kit is a cold-end compensated thermistor with 2 jumpers that can be used with a 1756-IRT8I or 1756-IT16 module. A cold-compensated thermistor is a temperature-dependent resistor used in situations where temperature correction is required in a thermocouple analog input module.

The Allen-Bradley 1756-CJC is a ControlLogix cold end compensation kit.

The 1756-CJC provides users with sensors compatible with the 1756-IRT88I and 1756-IT16 analog modules. This 1756-CJC accessory is primarily used when these modules are in thermocouple mode, as the modules themselves lack the necessary CJC sensors. The 1756-CJC is used for temperature correction, which improves the overall accuracy of thermocouple readings. If the module's channel wiring is connected via RTB, the ControlLogix 1765-CJC cold end compensation Kit is required.

A cold end compensation kit contains two jumpers and is attached to the screw terminals of the module. Ambient operating temperature must be between 0 and 60 degrees Celsius.

1756-CJC 热电偶传感器套件 冷端补偿套件

【其他型号推荐】