1756-A10XT  ControlLogix 机箱 专为水平后面板组装而设计

【产品详情】

Allen-Bradley 1756-A10XT 是 1756 ControlLogix 机箱的一个版本。通常，1756-A10XT 的规格与 1756-A10K 相同。此机箱的最高周围空气温度为 60 °C （140 °F）。此机箱的工作温度为 -25-60 °C （-13-140 °F）。此机箱的非工作温度为 -40-85 °C （-40-185 °F）。该机箱的相对湿度为 5-95%，无冷凝。该机箱在 2-10 Hz 时的工作振动为 500 g。该底盘的工作冲击为 30 g。该底盘的非工作冲击为 30 克。该机箱具有 6 kV 接触放电和 8 kV 空气放电的 ESD 抗扰度。Allen-Bradley 1756-A10XT 的重量约为 1.91 千克（4.2 磅）。此机箱的最小机柜为 50.8 x 85.75 x 20.3 厘米（20 x 33.75 x 8 英寸）。

Allen-Bradley 1756-A10XT 专为水平后面板组装而设计。1756-A10XT 是开放式设备。Allen-Bradley 1756-A10XT 适用于工业环境。此机箱用于污染等级 2 的区域 2 环境。外壳只能通过设备进入。除非电源已断开或已知该区域是安全的，否则请勿断开设备。

1756-A10XT  ControlLogix 机箱 专为水平后面板组装而设计

【英文介绍】

The Allen-Bradley 1756-A10XT is a version of the 1756 ControlLogix chassis. Generally, the 1756-A10XT has the same specifications as the 1756-A10K. The maximum ambient air temperature in this case is 60 °C (140 °F). The operating temperature of this chassis is -25-60 °C (-13-140 °F). The non-operating temperature of this chassis is -40-85 °C (-40-185 °F). The relative humidity of the chassis is 5-95%, and there is no condensation. The case has an operating vibration of 500 g at 2-10 Hz. The chassis has a working impact of 30 g. The chassis has a non-working impact of 30 grams. The case has ESD immunity of 6 kV contact discharge and 8 kV air discharge. The Allen-Bradley 1756-A10XT weighs about 1.91 kg (4.2 lb). The minimum cabinet size of this chassis is 50.8 x 85.75 x 20.3 cm (20 x 33.75 x 8 inches).

The Allen-Bradley 1756-A10XT is designed for horizontal rear panel assembly. The 1756-A10XT is an open device. The Allen-Bradley 1756-A10XT is designed for use in industrial environments. This chassis is intended for Zone 2 environments with contamination level 2. The enclosure can only be accessed through the device. Do not disconnect the device unless the power supply is disconnected or the area is known to be safe.

1756-A10XT  ControlLogix 机箱 专为水平后面板组装而设计

【其他型号推荐】