1756-A10K  箱设计在水平后面板组件上

【产品详情】

Allen-Bradley 1756-A10K 1756 ControlLogix 机箱设计在水平后面板组件上。此机箱的最高周围空气温度为 60 °C （140 °F）。此机箱的工作温度为 -25-60 °C （-13-140 °F）。1756-A10K 的重量约为 1.45 千克（3.2 磅）。此机箱的最小机柜为 50.8 x 76.2 x 20.3 厘米（20 x 30 x 8 英寸）。Allen-Bradley 1756-A10K 适用于工业环境。当应用于 2 区环境时，此机箱用于污染度为 1（定义见 EN / IEC0664-2）的环境。外壳只能通过设备进入。除非电源已断开或已知该区域无危险，否则请勿断开设备。

Allen-Bradley 1756-A10K 是开放式设备。此机箱应安装在专为特定环境条件设计的适当机箱中。为防止带电部件造成伤害，外壳内部只能使用工具进入。本出版物的其余部分可能包含有关必须满足某些产品安全认证的特殊类型外壳额定值的其他信息。请参阅 NEMA 标准 250 和 IEC 60529 出版物的出版物（如适用），了解不同类型外壳提供的保护级别的说明。

1756-A10K  箱设计在水平后面板组件上

【英文介绍】

The Allen-Bradley 1756-A10K 1756 ControlLogix chassis is designed on a horizontal rear panel component. The maximum ambient air temperature in this case is 60 °C (140 °F). The operating temperature of this chassis is -25-60 °C (-13-140 °F). The 1756-A10K weighs about 1.45 kg (3.2 lb). The minimum cabinet size of this chassis is 50.8 x 76.2 x 20.3 cm (20 x 30 x 8 inches). The Allen-Bradley 1756-A10K is designed for use in industrial environments. When used in zone 2 environments, the chassis is used in environments with a pollution level of 1 (as defined in EN/IEC0664-2). The enclosure can only be accessed through the device. Do not disconnect the device unless the power supply is disconnected or the area is known to be free of danger.

Allen-Bradley 1756-A10K is an open device. This case should be installed in an appropriate case designed for specific environmental conditions. To prevent damage from live parts, only tools can be used to enter the inside of the housing. The remainder of this publication may contain additional information about the ratings of special types of enclosures that must meet certain product safety certifications. Please refer to the publications of NEMA Standard 250 and IEC 60529 publications, where applicable, for a description of the level of protection provided by the different types of enclosures.

1756-A10K  箱设计在水平后面板组件上

【其他型号推荐】