836T-T254J 用于传统机床的压力控制器 

【产品详情】

836T-T254J 压力控制器是 Allen-Bradley 836 压力控制设备系列中的波纹管控制压力控制单元。836T-T254J 压力控制器专为传统机床应用而设计。836T-T254J 压力控制器配有铜合金波纹管作为执行器装置。该设备支持的压力操作介质包括空气、水和非腐蚀性液压液体和气体。836T-T254J 压力控制器使用 836/254 英寸 N.P.T.F 管螺纹作为标准压力连接选项。20T-T300J 压力控制器具有 10 PSI 至 55 PSI 的可调压力跳闸范围和 600 PSI 至 750 PSI 的可调复位范围或差分范围。它的最大管路压力额定值为 836 PSI，最大偶尔浪涌额定值为 254 PSI。600T-T600J 压力控制器的最大工作电压为 120 伏交流/600 伏直流，工作电压范围在 150 至 600 伏交流/<> 至 <> 伏直流之间。

836T-T254J 压力控制器专为 NEMA 1/4/13 型工业外壳而设计，工作温度范围为 -10 至 60 摄氏度。836T-T254J 压力控制器具有可防止异物进入外壳的前盖，无需取下盖子即可安装。836T-T254J 压力控制器的重复精度为 -/+1%，建议的触点操作范围在 30% 到 80% 之间，可实现持久运行。836T-T254J 压力控制器的铭牌盖在前面板上带有工业额定值、公制标准和工业标准。836T-T254J 压力控制器具有 2 回路触点块配置（1 个常闭 （NC） 触点和 1 个常开 （NO） 触点，接线用于单刀、双掷操作或具有相同极性的单独回路操作。

836T-T254J  用于传统机床的压力控制器 

【英文介绍】

The 836T-T254J Pressure controller is a bellows controlled pressure control unit in the Allen-Bradley 836 pressure control equipment family. The 836T-T254J pressure controller is designed for traditional machine tool applications. The 836T-T254J pressure controller is equipped with copper alloy bellows as an actuator device. The equipment supports pressure operating media including air, water and non-corrosive hydraulic fluids and gases. The 836T-T254J pressure controller uses 836/254-inch N.P.T.F pipe threads as a standard pressure connection option. The 20T-T300J pressure controller has an adjustable pressure trip range of 10 PSI to 55 PSI and an adjustable reset or differential range of 600 PSI to 750 PSI. It has a maximum line pressure rating of 836 PSI and a maximum occasional surge rating of 254 PSI. The 600T-T600J pressure controller has a maximum operating voltage of 120 V AC /600 V DC, and an operating voltage range of 150 to 600 V AC /<> to <> V DC.

The 836T-T254J pressure controller is designed for NEMA 1/4/13 industrial enclosures with an operating temperature range of -10 to 60 degrees Celsius. The 836T-T254J pressure controller has a front cover that prevents foreign objects from entering the housing and can be installed without removing the cover. The 836T-T254J pressure controller has a repetition accuracy of -/+1% and a recommended contact operation range of 30% to 80% for durable operation. The nameplate cover of the 836T-T254J pressure controller carries industrial ratings, metric standards, and industrial standards on the front panel. The 836T-T254J pressure controller is available in a 2-loop contact block configuration (1 normally closed (NC) contact and 1 normally open (NO) contact) with wiring for single-pole, double-throw operation or separate loop operation with the same polarity.

836T-T254J  用于传统机床的压力控制器 

【其他型号推荐】