MPM-B2153F-MJ72AA 中惯量伺服电机 支持多圈高分辨率编码器

☆型号：MPM-B2153F-MJ72AA 中惯量伺服电机  支持多圈高分辨率编码器

【产品详情】

 Allen-Bradley/Rockwell Automation MPM-B2153F-MJ72AA 伺服电机是 MPM 伺服电机系列的中惯量伺服电机。它被归类为 MPM 伺服电机系列中的 400 伏电压类别。MPM-B2153F-MJ72AA 中惯量伺服电机设计有 3 个包含稀土磁铁的磁铁组。其基本额定转速为 3000 RPM。MPM-B2153F-MJ72AA 中惯量伺服电机支持多圈高分辨率编码器进行反馈。

MPM-B2153F-MJ72AA是一款中惯量无刷伺服电机，属于Allen-Bradley系列优质永磁旋转伺服电机。这些电机推荐用于需要高惯性负载的应用。Allen-Bradley MPM-B2153F-MJ72AA 中惯量无刷伺服电机在 400 伏电压和 3000 RPM 速度下运行。它有三个磁铁堆，螺栓圆直径或框架尺寸为 215 毫米，以及一个多圈高分辨率编码器。连接器可旋转至180度。Allen-Bradley MPM-B2153F-MJ72AA 中惯量无刷伺服电机必须受到电磁干扰保护，包括接地系统。考虑到必须尽可能屏蔽和缩短电缆，并且必须应用滤波器，可以提供更高的电磁干扰保护。Allen-Bradley MPM-B2153F-MJ72AA 中惯量无刷伺服电机具有 IP65 等高度外壳，可防止固体颗粒进入，同时保护伺服电机免受水、液体滴落和暂时浸泡的影响。该外壳可以与轴封和正气压附件套件等附件结合使用，这将提高外壳提供的保护水平。通过轴封，伺服电机可以暴露在水射流脉动中。为了延长 Allen-Bradley MPM-B2153F-MJ72AA 中惯量无刷伺服电机的使用寿命，可以使用轴封套件来提供更高级别的保护，这些套件必须在短时间内进行检查，以确保污染物没有渗透到它们中。建议定期检查电机，以发现损坏或有缺陷的部件并按时更换。为了改善 MPM-B1153E-SJ72AA 模块的物理冷却过程，用户可以在反馈连接器上安装正压套件（目录号 MPF-7-AIR-PURGE），以限制电机内部的污染。轴封套件可用于 IP 闭合升级。

Allen-Bradley MPM-B2153F-MJ72AA是一款Kinetix中惯量伺服电机。该伺服电机兼容各种 Kinetix 伺服驱动器，包括 Kinetix 5500、Kinetix 5700、Kinetix 6200/6500、Kinetix 6000、Kinetix 300/350、Kinetix 2000 和 Kinetix 7000。通过与适当的伺服驱动器配合使用，可以配置伺服电机以执行所需的运动和位置控制，适用于各种工业过程，包括但不限于印刷、卷筒纸处理、转换和汽车。

☆型号：MPM-B2153F-MJ72AA 中惯量伺服电机  支持多圈高分辨率编码器

【英文介绍】

Allen-Bradley/Rockwell Automation MM-B2153F-MJ72AA servo motor is a medium inertia servo motor in the MPM servo motor family. It is classified in the 400 volt voltage category of the MPM servo motor family. The MM-B2153F-MJ72AA medium inertia servo motor is designed with 3 sets of magnets containing rare earth magnets. Its basic rated speed is 3000 RPM. The MM-B2153F-MJ72AA medium inertia servo motor supports multi-turn high-resolution encoders for feedback.

Mm-b2153f-mj72aa is a medium inertia brushless servo motor, belonging to the Allen-Bradley series of high-quality permanent magnet rotary servo motor. These motors are recommended for applications requiring high inertial loads. The Allen-Bradley MPM-B2153F-MJ72AA medium inertia brushless servo motor operates at 400 volts and 3000 RPM. It has three magnet stacks, a bolt circle diameter or frame size of 215 mm, and a multi-turn high-resolution encoder. The connector can be rotated to 180 degrees. Allen-Bradley MPM-B2153F-MJ72AA medium inertia brush servo motor must be protected from electromagnetic interference, including grounding system. Considering that cables must be shielded and shortened as much as possible, and filters must be applied, higher protection against electromagnetic interference can be provided. The Allen-Bradley MPM-B2153F-MJ72AA medium inertia brush servo motor has an IP65 height housing that prevents the entry of solid particles while protecting the servo motor from water, liquid dripping and temporary soaking. The housing can be used in combination with accessories such as shaft seals and positive air pressure attachment kits, which will increase the level of protection provided by the housing. Through the shaft seal, the servo motor can be exposed to water jet pulsations. To extend the service life of the inertia brushless servo motors in the Allen-Bradley MPM-B2153F-MJ72AA, a higher level of protection can be provided using shaft seal kits that must be checked at short notice to ensure that contaminants have not penetrated them. It is recommended to check the motor regularly to find damaged or defective parts and replace them on time. In order to improve the physical cooling process of the MMP-B1153E-SJ72AA module, the user can install a positive pressure kit (catalog number MPF-7-AIR-PURGE) on the feedback connector to limit the contamination inside the motor. The shaft seal kit can be used for IP closing upgrade.

Allen-Bradley MPM-B2153F-MJ72AA is a Kinetix medium inertia servo motor. The servo motor is compatible with various Kinetix servo drives, These include Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000 and Kinetix 7000. When used in conjunction with the appropriate servo drive, servo motors can be configured to perform the desired motion and position control for a variety of industrial processes including, but not limited to, printing, web handling, conversion, and automotive.

☆型号：MPM-B2153F-MJ72AA 中惯量伺服电机  支持多圈高分辨率编码器

【其他型号推荐】